PLC ENGINEERING

IC693DSM302 GE Fanuc 90-30 Digital Servo Module

Home

GE Funac

IC693DSM302 GE Fanuc 90-30 Digital Servo Module

IC693DSM302 GE Fanuc 90-30 Digital Servo Module

IC693DSM302 is a Discrete Input/Output (I/O) module that belongs to the GE Fanuc Series 90-30 PLCs.

HS CODE : 8538909200

  • Product No :

    IC693DSM302
  • Manufacture :

    General Electric
  • Size (cm) :

    13 * 12 * 7
  • Weight (kg) :

    0.45
  • Origin :

    USA
  • Warranty :

    12 Month
  • Lead Time :

    Ready Stock
  • Description :

    Servo Module

Product parameters

I/O points: 16 digital input points + 16 digital output points (total 32 points).

Input characteristics:

Type: DC input (sourcing/sinking compatible, can be set via jumper).

Voltage range: 10 to 30VDC (typical 24VDC).

Input current: approximately 7mA in the ON state and ≤1mA in the OFF state.

Response time: ≤10ms (ON/OFF).

Output characteristics

Type: Transistor output (NPN, youdaoplaceholder7 type).

Voltage range: 10 to 30VDC (typical 24VDC).

Output current: Maximum 0.5A per point, maximum 2A per 8-point group, total maximum 4A.

Switching frequency: ≤1kHz (resistive load).

Isolation and Protection

Photoelectric isolation (isolation voltage 2500V AC) between the input, output and backplane bus.

The output is equipped with short-circuit protection (self-recovery).

Environment and Installation

Operating temperature: 0℃ to 60℃ Storage temperature: -40℃ to 85℃.

Protection grade: IP20 (To be installed in the control cabinet).

Installation: Compatible with 90-30 series standard guide rails and base plates, with a width of 40mm.

Function

Hybrid I/O integration: Integrating 16-point input and 16-point output into a single module reduces the number of modules, saves control cabinet space, and is suitable for scenarios where I/O points are concentrated.

Flexible adaptation: The input supports source type/drain type switching and is compatible with different types of sensors (such as proximity switches, photoelectric switches). The transistor output can directly drive small solenoid valves, indicator lights and other DC loads.

Safety protection: Automatic protection when output short circuit occurs. Normal operation is restored after the fault is eliminated, reducing the risk of module damage. The photoelectric isolation design reduces external interference and enhances system stability.

Status indication: Each point is equipped with an LED indicator light to display the input/output status in real time, facilitating on-site debugging and fault detection.

Application scenarios

Small-scale automated equipment: such as packaging machines, labeling machines, control the actuating elements of the equipment (solenoid valves, cylinders) and collect sensor signals (position, in place detection).

Production line workstation control: In a single workstation on the assembly line, it integrates the control of the start and stop of small motors, fixture actions (output), workpiece detection, and limit signals (input).

Warehousing and logistics equipment: such as small conveyor belts, sorting mechanisms, control drive components (output) and receive signals from photoelectric sensors and limit switches (input).

Equipment renovation and upgrading: For the expansion of existing equipment in the 90-30 PLC system, supplementing I/O points, and simplifying wiring

Advantage Products:

DANFOSS VLT® AutomationDrive,Plus+1®,MCP
KEYENCE KV-800,KV-300,KP-3000,KP-7000,KJ,KV-Nano,HMI
GE FANUC PACSystems RX3i,90-30,90-70
SCHNEIDER Modicon M340,Modicon M580,Modicon X80,Pioneer
BENTLY NEVADA 3500/94,3500/53,3500/22M,3500/42M,330180-90-00
HONEYWELL Experion® PKS,ControlEdge™ ,HC900
ALLEN BRADLEY CompactLogix,ControlLogix, MicroLogix,Flex I/O
WESTINGHOUSE Westinghouse Modbus,Westinghouse 9080,Westinghouse 8000,Westinghouse 1000

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

BL
Bou Li
Sales Manager
📱
+86 175 5077 6091
R
Ricardo
Sales Specialist
📱
+86 188 5015 7206
T
Tina
Sales Specialist
📱
+86 131 2336 8748
DG
Doris
Sales Specialist
📱
+86 135 9953 1915

Conditions

Original Brand New

Approximate Lead Time

3-5 days

Warranty

One Year

Online Service

24 / 7

Express Company

DHL / FedEx / UPS / TNT etc.

MOQ

1 Piece

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

IC693CPU311 GE
IC693CPU311 GE Fanuc 90-30 CPU Base
IC693CPU311 is a 5-slot embedded CPU baseplate manufactured by GE Fanuc that belongs to the Series 90-30 mid-range CPU family. HS CODE : 8538909200
More +
IC693CPU313 BASE
IC693CPU313 GE Fanuc 90-30 CPU Base
IC693CPU313 is an embedded CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU323 FANUC
IC693CPU323 GE Fanuc 90-30 CPU Base
IC693CPU323 is a 10-slot embedded CPU baseplate from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU331 CPU
IC693CPU331 GE Fanuc 90-30 CPU
IC693CPU331 is a modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU341 CPU
IC693CPU341 GE Fanuc 90-30 CPU
IC693CPU341 is a central processing unit module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU350 FANUC
IC693CPU350 GE Fanuc 90-30 CPU
IC693CPU350 is a single-slot CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU351 GE
IC693CPU351 GE Fanuc 90-30 CPU
IC693CPU351 is a single-slot modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU363 FANUC
IC693CPU363 GE Fanuc 90-30 CPU
IC693CPU363 is a CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Copyright 2025 @ TZ TECH Co., LTD. .All Rights Reserved Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Sitemap | Blog | XML | Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact

YOUR COOKIE SETTINGS

In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.

Accept and continue Decline cookies