22B-D6P0N104 Allen-Bradley PowerFlex 40 Variable Frequency Drive (VFD)

Product parameters

Model: 22B-D6P0N104

Product series: PowerFlex 40

Input voltage: 323-528V AC, three-phase, 50/60 Hz

Output power:

2.2kW (3.0HP) - Normal Duty

2.2kW (3.0HP) - Heavy Duty

Output current: 6.0A

Frame size: Frame B

Enclosure type: IP20 NEMA/Open (without filter)

Control mode:

V/Hz control (Volts per Hertz)

Sensorless Vector Control

Communication interface:

Built-in RS485 (supporting Modbus RTU and DSI protocols)

Optional communication modules (such as DeviceNet, EtherNet/IP, ControlNet)

Input/Output:

Digital input: 7 (programmable)

Analog input: 1 (0-10V or 4-20mA)

Analog output: 1 (0-10V or 4-20mA, programmable)

Relay output: 1 (Form C, 1 NO/NC)

Photoelectric isolation output: 1

Braking function: No built-in braking transistor (If dynamic braking is required, an external braking resistor is needed)

Frequency range: 0-400 Hz

Efficiency: Approximately 97.5% (typical value)

Overload capacity

110% overload, 60 seconds (normal load)

150% overload, 60 seconds (heavy load)

Operating temperature: -10°C to 50°C (14°F to 122°F). Derating is required above 50°C

Storage temperature: -40°C to 85°C (-40°F to 185°F)

Relative humidity: 5-95%, non-condensing

Maximum working altitude: 1,000 meters (3,300 feet), no derating required; Up to 4,000 meters (with derating required)

Protection grade: IP20 (needs to be installed in the control cabinet)

Certifications: UL, cUL, CE, C-Tick, RoHS, etc

Installation method:

Supports DIN rail mounting or screw fixation (panel mounting)

Supports Zero Stacking and can be installed adjacent to each other at an ambient temperature of 45°C to save space

Function

Flexible motor control

Supports V/Hz control and is suitable for simple applications such as fans and pumps.

Supports sensorless vector control, providing better low-speed torque and speed regulation.

Built-in communication:

It is equipped with an RS485 port and supports Modbus RTU and DSI protocols, facilitating integration with PLC or HMI.

Advanced communication protocols such as DeviceNet and EtherNet/IP can be supported through the adapter.

User-friendly operation

Equipped with a built-in keyboard and LED display, it supports local parameter configuration and status monitoring.

Support DriveTools SP software and Logix Designer for advanced configuration.

Protection function:

Overload protection, overvoltage/undervoltage protection, short-circuit protection, and motor overheat protection.

Support ground fault detection and interphase short-circuit protection.

Compact design

Miniaturized design, suitable for control cabinets with limited space.

Support zero-pitch installation to optimize the utilization of panel space.

Programmable I/O

It provides flexible input/output interfaces, suitable for a variety of external sensors and control signals.

Application scenarios

Fan and pump systems:

It is used in HVAC (Heating, Ventilation and Air conditioning), water treatment or industrial pump systems, achieving energy conservation and flow regulation through variable frequency control.

Material handling

Control the conveyor belt, hoist or conveying system to ensure smooth start-up and precise speed control.

It is applicable to logistics, warehousing or packaging production lines.

Simple processing equipment:

It is used in small machine tools, mixers, centrifuges and other equipment, providing reliable speed and torque control.

Suitable for the food and beverage, textile or light industry.

OEM equipment integration: Embedded in OEM equipment (such as packaging machines, printing machines), providing cost-effective motor control solutions.

Distributed control system, through the RS485 communication modules or optional and ControlLogix/CompactLogix PLC integration, suitable for factory automation network.

Energy-saving renovation: It is used to replace the fixed-speed motor drive system, reducing energy consumption through frequency conversion control, and is suitable for upgrading old equipment.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]