IC693CPU351 GE Fanuc 90-30 CPU

Product parameters

Manufacturer: GE Fanuc

Product type: Single-slot modular CPU

Processor: 80386EX processor

Processing speed: 25 MHz

Scanning rate: 0.22 milliseconds per 1K Boolean logic

User program memory: Maximum 240KB

Input/output points: Discrete input (%I) : up to 2048 points

Discrete output (%Q) : up to 2048 points

Simulated input (%AI) : Up to 2048 characters

Analog output (%AQ) : up to 512 characters

Register memory: Configurable from 128 to 32,640 words (in increments of 128 words)

Global memory (%G) : 1280 bits

Internal coil (%M) : 4096 bits

Temporary coil (%T) : 256 bits

System status reference: 128 bits

System register: 28,000 words

Timer/counter: 2000

Communication ports: 3 serial ports (1 located in the power module, supporting SNP/SNP-X slave protocol; Ports 1 and 2 support RTU slave and SNP/SNP-X master/slave protocols.

Power supply requirement: 5 VDC, 890 mA

Operating temperature: 0°C to 60°C (32°F to 140°F)

Memory types: RAM (with battery backup) and Flash storage

Baseboard support: Up to 8 baseboards are supported (1 CPU baseboard +7 expansion or remote baseboards)

Installation position: It must be installed in slot 1 of the base plate

Weight: Approximately 240 grams (0.53 pounds)

Function

Modular CPU: IC693CPU351 is a single-slot modular CPU of the GE Fanuc Series 90-30 PLC series, integrating CPU, memory and circuits. It is suitable for systems with high I/O density and complex applications.

Instruction support: Supports shift registers, timers, counters, Override functions, periodic subroutine interrupts, floating-point operations, and SER instructions (for debugging and dynamic troubleshooting).

Communication function: Equipped with 3 serial ports, it supports SNP/SNP-X slave stations (power module ports), RTU slave stations, and SNP/SNP-X master/slave stations (ports 1 and 2). Supports multi-point communication via LAN and is compatible with optional modules such as Ethernet, FIP, Profibus, GBC, GCM, and GCM+. The CMM module needs to support the CCM or RTU master protocol, while the PCM module should support the RTU master protocol.

Memory backup: Equipped with battery backup RAM and Flash storage to ensure data retention in case of power failure.

Module compatibility: Supports multiple I/O modules and PCM/CCM modules, suitable for 5-slot or 10-slot baseboards, and compatible with advanced modules such as DSM (Servo Motion Control) and APM (Analog Motion Control).

Programming language: Supports trapezoidal Logic, SFC and C language programming, compatible with Logicmaster, VersaPro, Proficy Logic Developer and CIMPLICITY control software.

Expansion capability: Supports up to 7 expansion or remote backplanes, suitable for medium and large-scale I/O expansion requirements.

Other features: Built-in clock (TOD), support for manual control overlay function, suitable for complex control logic and real-time applications.

Application scenarios

Medium and large-scale industrial automation: Suitable for complex control tasks.

Distributed control system: Through multi-point communication and optional communication modules, it is suitable for scenarios that require remote I/O or networked control, such as factory automation and SCADA systems.

Data acquisition and processing: Supports a large number of digital and analog I/O, suitable for collecting and processing data from sensors, actuators and other devices, applied in the chemical, food and beverage, and oil and gas industries.

Legacy system maintenance: As a discontinued Series 90-30 component, it is suitable for the replacement or maintenance of existing systems, especially in scenarios where the compatibility of the original system needs to be maintained.

Cost optimization project: The configurable modular design allows for the selection of modules based on requirements, optimizing space and costs.

Advantage Products:

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]