IC693PCM311 GE Fanuc 90-30 Programmable Coprocessor Module

Product parameters

Communication interface: 1 10/100Mbps adaptive Ethernet port (RJ45 interface), supporting TCP/IP, UDP, and Modbus TCP/IP protocols.

Communication function

Support remote programming and debugging of programming software (such as Logicmaster, Proficy Machine Edition).

Support data interaction with HMI (such as PanelView, iFix) to achieve data synchronization between the monitoring screen and the PLC.

Supports Modbus TCP/IP master/slave mode and can communicate with other devices that support this protocol, such as frequency converters and instruments.

Compatibility: Only applicable to high-end processors of 90-30 series PLCS (such as IC693APU302/305), and it needs to be installed in the expansion slot of the rack where the CPU is located.

Power Supply and Environment

Power supply: The 90-30 system backplane bus provides 5VDC, with a power consumption of approximately 0.3A.

Operating temperature: 0℃ to 60℃ Storage temperature: -40℃ to 85℃ Protection grade IP20 (to be installed in the control cabinet).

Function

Ethernet Extension: Add Ethernet communication capabilities to the 90-30 PLC system, breaking through the rate and distance limitations of traditional serial communication, and achieving high-speed data transmission (up to 100Mbps).

Multi-protocol support: Compatible with the TCP/IP basic protocol and the Modbus TCP/IP industrial protocol, IT can be seamlessly integrated into factory Ethernet and interconnected with IT systems (such as MES, SCADA) or other industrial equipment.

Remote management: Supports remote downloading/uploading of programs and monitoring of PLC operation status via Ethernet, reducing on-site maintenance workload and improving debugging efficiency.

Data interaction optimization: Compared with serial communication, Ethernet has a higher transmission rate and lower latency, making it suitable for scenarios that require high-frequency data exchange (such as real-time process parameter collection and equipment status monitoring).

Application scenarios

Factory networked control: In small and medium-sized production lines, 90-30 PLCS are connected to the factory Ethernet to achieve real-time data interaction with HMI or cross-system communication with other PLCS (such as S7-300, Allen-Bradley).

Remote monitoring and debugging: Connect to the SCADA system in the central control room via Ethernet, upload real-time equipment operation data (such as output and fault information), or remotely modify the PLC program to reduce on-site operations.

Modbus TCP device integration: Connect intelligent instruments, frequency converters, robots and other devices that support Modbus TCP, centrally collect data and issue control instructions, simplifying system wiring.

Upgrade of outdated systems: Add network interfaces to the existing 90-30 PLC systems (without Ethernet functionality) to adapt them to industrial Internet of Things (IIoT) scenarios and extend the equipment's life cycle.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!