IC693MDL742 GE Fanuc 90-30 Discrete I/O Module

Product parameters

Supply voltage: AC 120V / 240V (allowable fluctuation range ±10%), universal for 50/60Hz

Output points: 16 independent digital output channels (designed in 4 groups, with 4 channels in each group, sharing 1 common terminal)

Output type: Bidirectional thyristor (SCR) output, without mechanical contacts, compatible with AC loads

Maximum output current of a single channel: 1A (continuous operation), surge current 8A (lasting for 10ms, coping with load start-up impact)

Output voltage range: AC 85V to 264V (Wide voltage compatibility, compatible with industrial power supply in different regions)

Turn-off leakage current: Maximum 2.5mA (does not affect the load state in standby mode)

Response time: Typical on value 1ms, typical off value 10ms (conforming to the conventional control timing sequence of AC load)

Isolation grade: 2500V AC (Electrical isolation between the module and the backplane bus, as well as between each group of outputs, with strong anti-interference ability)

Environmental adaptability: Operating temperature 0℃ to 60℃, storage temperature -40 ℃ to 85℃, protection grade IP20

Installation method: GE Series 90-30 PLC standard rack installation (compatible with mainstream racks such as 16-slot and 8-slot within the series)

Function

Group AC drive: The 16-channel output is divided into 4 groups, with 4 channels in each group sharing a common terminal. Wiring can be done in groups based on load power or control logic, simplifying wiring and reducing the risk of interference.

Contactless reliable operation: It adopts a thyristor output design, eliminating mechanical contact wear issues. Compared with relay output, it has a longer lifespan and reduces the frequency of module maintenance and replacement.

Wide voltage and anti-interference: Supports dual voltage input of AC 120V/240V, compatible with most industrial power supply standards worldwide; The 2500V AC high isolation level can suppress the noise of the AC power grid and ensure the stability of the output signal.

Status and fault visualization: Each output channel is equipped with an independent LED indicator light. The light turns on when the output is effective and off when it is turned off, allowing for a quick determination of the channel's working status. When combined with the PLC program, it can achieve overcurrent and overvoltage fault alarms, facilitating problem identification.

Application scenarios

Industrial motor control: In machine tools, conveyor belts and other equipment, it controls the starting contactor and braking solenoid valve of AC motors to achieve the start, stop and speed regulation logic of the equipment.

Heating system control: In plastic molding machines and food drying lines, AC heating tubes and temperature control relays are driven, and in combination with temperature sensors, precise control of process temperature is achieved.

Buildings and HVAC equipment: In the ventilation systems of large shopping malls and factories, AC contactors that control exhaust fans and air conditioning compressors are used to achieve automatic regulation of environmental temperature and ventilation.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!