IC693MDL734 GE Fanuc 90-30 Discrete I/O Module

Core parameters

Output points: 16 channels, relay output type (single pole single throw, NO normally open contact)

Single-channel load capacity: Up to 2A (resistive load), supporting AC/DC hybrid load

Load voltage range

AC: 120V/240V (50/60Hz)

DC: 24V/48V

Contact life: Mechanical life over 10 million times, electrical life (under rated load) over 100,000 times

Isolation method: The entire module is isolated from the PLC backplane bus (isolation voltage 1500V AC, 1 minute), and there is no isolation between channels

Response time: Maximum connection time 10ms, maximum disconnection time 5ms

Working environment: Working temperature 0~60℃, storage temperature -40 ~+85℃. Humidity: 5% to 95% (non-condensing)

Power consumption: The maximum backplane bus current is 50mA (5V DC), and the power consumption of the external power supply varies with the load

Function

Universal load drive: A 2A single-channel current can directly drive conventional industrial equipment such as small contactors, solenoid valves, indicator lights, and micro pumps, without the need for additional intermediate relays, simplifying wiring and reducing costs.

AC/DC compatibility: Supports AC 120V/240V and DC 24V/48V loads, adaptable to different power supply types of actuators on site, reducing the variety of module selections.

Reliable isolation protection: The module is electrically isolated from the PLC backplane bus, preventing voltage fluctuations and short-circuit faults from external loads from impacting the host, thereby enhancing the system's safety and stability.

Easy integration and debugging: Specifically designed for MicroLogix 1000/1100/1200 series PLCS, it is plug-and-play via the backplane bus and automatically allocates output addresses. Compatible with Rockwell RSLogix programming software, parameter configuration is convenient.

Application scenarios

Control of small and medium-sized equipment: In food packaging machines and small assembly lines, drive DC 24V solenoid valves (such as cylinder control), AC 220V small heaters or indicator lights to achieve equipment operation and status indication.

Auxiliary system control: Start and stop control of equipment such as cooling fans, small transfer pumps, and pneumatic valves in industrial workshops, adapted to the requirements of conventional power loads.

Building automation: Switch control of lighting circuits, air conditioning terminal equipment (such as fan coil units), and access control electromagnetic locks in small commercial buildings.

Automation renovation project: When installing PLC control for traditional single-machine equipment (such as old machine tools and textile machines), it serves as an output expansion module to achieve logical control of the actuator at a low cost.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!