IC693ALG442 GE Fanuc 90-30 PLC Analog Combo Module

Product parameters

1. Core specifications

Product type: Analog input/output (I/O) modules for GE Fanuc Series 90-30 PLC series

Input channels: 4 differential analog input channels

Output channels: 2 analog output channels

Input signal type:

Voltage type: ±10V DC (full scale), input impedance ≥100kΩ

Current type: 4-20mA DC (full scale), input impedance 250Ω (standard)

Output signal type

Voltage type: ±10V DC (full scale), output load ≥1kΩ

Current type: 4-20mA DC (full scale), output load 250-600Ω (typical)

Precision grade

Input accuracy: ±0.1% full scale (under standard conditions of 25℃)

Output accuracy: ±0.1% full scale (under standard conditions of 25℃)

Resolution: 16-bit A/D conversion (input), 16-bit D/A conversion (output)

Sampling rate: The typical sampling rate per channel is 100Hz (configurable through software)

2. Electrical and environmental parameters

Supply voltage: +5V DC (from the PLC backplane power supply), typical power consumption 2.5W

Isolation characteristics: Electrical isolation between channels and between channels and backplanes (isolation voltage ≥500V AC)

Operating temperature: 0℃ - 60℃ (for operation), -40℃ - 85℃ (for storage)

Humidity range: 5% - 95% RH (Non-condensing)

Protection grade: IP20 (Panel installation, relying on control cabinet protection)

3. Compatibility

Compatible with the backplane of GE Fanuc Series 90-30 PLC (such as IC693CHS391/392, etc.)

Supports GE programming software: Logicmaster 90-30, Concept, Proficy Machine Edition

Function

Analog signal conversion and processing: Convert continuous analog signals from industrial sites (such as pressure, temperature, and flow signals from sensors) into digital signals recognizable by PLCS, and simultaneously convert digital instructions output by PLCS into analog signals that actuators can receive, achieving a closed loop of "acquisition - control - output".

Multi-signal type adaptation: Both input and output support two mainstream industrial signals, voltage and current, without the need for additional adapter modules, and are compatible with most standard industrial sensors and actuators.

High precision and stability: 16-bit resolution +±0.1% accuracy, ensuring the accuracy of continuous quantity control in industrial processes; It has a signal filtering function, which can suppress on-site electromagnetic interference and enhance data stability.

Channel isolation protection: Electrical isolation design between channels and from the backplane to prevent signal crosstalk and external voltage surges from damaging the module and PLC host, enhancing the system's anti-interference capability.

Software configuration flexibility: Through programming software, the signal type, measurement range, and filtering parameters of each input/output channel can be configured. It supports functions such as linear calibration and zero point migration, adapting to the signal requirements of different scenarios.

Diagnosis and Fault Feedback: It is equipped with diagnostic functions for module power supply faults, signal over-range, channel faults, etc. Fault information can be fed back to the upper computer through the PLC system, facilitating maintenance and troubleshooting.

Application scenarios

Process industry control: Pressure, temperature, flow and liquid level control in the petrochemical, chemical and pharmaceutical industries, compatible with pressure transmitters, flow transmitters and other sensors, driving control valves and pneumatic actuators.

Intelligent manufacturing and automated production lines: Process parameter control of production lines in automotive manufacturing and electronic manufacturing, in combination with frequency converters and servo controllers to achieve precise speed regulation or displacement control.

Energy and power industry: Auxiliary system control for thermal power, hydropower, and new energy power stations, collecting sensor signals and driving actuators to stabilize working conditions.

Water treatment and environmental protection equipment: Collection of water quality parameters (such as pH value and dissolved oxygen) in sewage treatment plants, flow control of dosing pumps, and pressure regulation of water supply systems to ensure that the treatment process meets standards.

Mechanical equipment automation: Speed, tension and position control for machine tools, packaging machinery and printing machinery, compatible with encoders, tension sensors and other devices.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!