IC693ALG220 GE Fanuc 90-30 PLC Analog I/O Module

Product parameters

Module type: Analog voltage input module, compatible with Series 90-30

Input channels: 4 single-ended input channels

Input voltage range: -10 to +10 VDC

Optional current input: Supports -40 to +40 mA through a 250-ohm shunt resistor (user installation required)

Resolution: Voltage: 12 bits (5 mV/LSB)

Current: 10 bits (20 µA/LSB, precision resistance can be increased to 11 bits)

Absolute accuracy: Voltage: ±10 mV (typical value, 25°C); ±30 mV (maximum value, full temperature range)

Current: ±40 µA (typical value, 25°C); ±160 µA (maximum value, full temperature range)

Conversion speed: 1 ms per channel, module update rate: 4 ms

Isolation: 1500 VAC is isolated from the field side and the logic side

Backplane current consumption: 5 V: 27 mA

24 V (isolated) : 98 mA

Terminal blocks: 20 screw terminals, supporting 14 to 24 AWG wires

Indicator: 1 LED, showing the operating status of the module (lit when normal)

Operating temperature: 0 to 60°C

Size: Standard Series 90-30 module size, single slot width

Function

Analog signal conversion: Four channels convert -10 to +10 VDC analog signals into 16-bit 2 complement format digital signals.

Optional current mode: Connect a 250-ohm shunt resistor via a jumper on the user terminal, supporting current input from -40 to +40 mA.

High isolation: 1500 VAC isolation, reducing the interference of external noise on the backplane.

Fast conversion: 1 ms conversion speed per channel to ensure real-time data processing.

LED status indication: The LED at the top of the module displays the operating status, facilitating fault diagnosis.

Wiring suggestion: It is recommended to use twisted-pair shielded instrument cables to reduce capacitive load and noise.

Application scenarios

Industrial automation: It is used to collect sensor signals (such as pressure, temperature, and flow sensors) and convert them into digital signals that PLCS can process.

Process control: Monitoring analog quantities such as voltage or current signals in the chemical, oil and gas, and power industries.

Equipment monitoring: Connect to industrial equipment (such as transmitters, instruments) to monitor analog output in real time.

Data acquisition: Used for systems that require high-precision voltage input, such as laboratory equipment or test platforms.

Integration of outdated systems: Supports the transformation of the Series 90-30 platform and handles low-density analog input requirements.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]