1761-NET-AIC Allen Bradley Rockwell CompactLogix Advanced Interface Converter Module
1761-NET-AIC is an Advanced Interface Converter (AIC) from Allen-Bradley that provides a communication link between various networked devices.
HS CODE : 8538909200
Product No :
1761-NET-AIC 1761NETAICManufacture :
Allen BradleySize (cm) :
7.6 * 5.6 * 12Weight (kg) :
0.19Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
Converter ModuleProduct parameters
Communication port:
2 RS-232 ports: 1 9-pin D-Sub connector and 1 8-pin mini DIN circular connector
1 DH-485 port: Phoenix plug connector
Supported protocols: DH-485, DF1 full-duplex, half-duplex user mode ASCII
Power supply requirements:
External power supply: 20.4-28.8 VDC (nominal 24 VDC)
Current consumption: Maximum 120 mA @ 24 VDC
Surge current: Maximum 200 mA @ 24 VDC
Power selection: Select "External" (24 VDC power supply) or "Cable" through the front panel switch
Communication rate: Configured through the communication rate selection switch on the front panel (125 Kbps, 250 Kbps, 500 Kbps)
Isolation voltage: Test withstand voltage of 500 VDC for 60 seconds
Operating temperature: 0°C to 60°C (32°F to 140°F)
Storage temperature: -40°C to 85°C (-40°F to 185°F)
Relative humidity: 5% to 95% (no condensation)
Vibration: 10-500 Hz, 5.0 g, 0.030 inches peak-to-peak value, 2 hours per axis (in compliance with IEC 60068-2-6)
Working shock: 30 G, non-working shock: 50 G (in compliance with IEC 60068-2-27)
Protection grade: IP20 (Open Type)
Installation method: DIN rail or panel installation (supports vertical or horizontal installation)
Wiring method: Removable terminal block (RTB), applicable wire diameter 0.25- 2.5mm ² (14-22 AWG), temperature rating 75°C or higher, maximum insulation thickness 1.2mm
Certifications: C-TICK, CCC, CE, CUL, GOST, KC, MARINE, UL, IECEx Scheme
ESD immunity: 6 kV contact discharge, 8 kV air discharge (in compliance with IEC 61000-4-2)
Conducted radio frequency immunity: 10 V/m, 200 Hz 50% pulse, 100% AM@900/1890 MHz (in compliance with IEC 61000-4-3)
Function
Communication bridging: Connect devices that support the DF1 protocol to the DH-485 network, supporting point-to-point isolation, RS-232 to RS-485 isolation, and RS-232 to half-duplex user mode ASCII isolation.
Operating mode:
Point-to-point isolator
RS-232 to RS-485 isolators
RS-232 to half-duplex user mode ASCII isolator
Flexible power supply: Supports External 24VDC power supply or power supply from compatible devices (such as MicroLogix or SLC controllers) via an 8-pin mini DIN communication Cable. The power selection switch needs to be set to "Cable" or "External".
Modular design: Compatible with the POINT I/O system, supporting DeviceNet, ControlNet, EtherNet/IP and Profibus networks (via adapter), and compatible with CompactLogix and ControlLogix controllers.
Diagnostic function: Real-time diagnosis is provided through 4 LED indicator lights (3 communication port status and 1 power status). Flashing indicates data transmission, and going off indicates that the port is idle or has no power.
Installation flexibility: Supports DIN rail or panel installation, can be installed vertically or horizontally, suitable for space-constrained scenarios.
Configuration and programming: Configured through RSLogix 500, RSLogix 5000 or Studio 5000 Logix Designer software, supporting RSNetWorx for DeviceNet for network Settings.
Application scenarios
Manufacturing industry: Connect MicroLogix or SLC controllers to the DH-485 network for distributed control in automotive manufacturing and food and beverage production lines.
Material handling: Achieve communication between the controller and HMI or other devices in equipment such as conveyor belts and stacker cranes.
Packaging machinery: Provide reliable network bridging for sealing, labeling and sorting equipment.
Process control: Connecting PLCS, Hmis and modems in the chemical and pharmaceutical industries, supporting distributed I/O management.
Building automation: Communication between controllers and operation interface devices in HVAC systems.
Network expansion: Extend the DH-485 network from 4,000 feet to 8,000 feet to enhance the communication distance.
Advantage Products:
DANFOSS | VLT® AutomationDrive,Plus+1®,MCP | ||
KEYENCE | KV-800,KV-300,KP-3000,KP-7000,KJ,KV-Nano,HMI | ||
GE FANUC | PACSystems RX3i,90-30,90-70 | ||
SCHNEIDER | Modicon M340,Modicon M580,Modicon X80,Pioneer | ||
BENTLY NEVADA | 3500/94,3500/53,3500/22M,3500/42M,330180-90-00 | ||
HONEYWELL | Experion® PKS,ControlEdge™ ,HC900 | ||
ALLEN BRADLEY | CompactLogix,ControlLogix, MicroLogix,Flex I/O | ||
WESTINGHOUSE | Westinghouse Modbus,Westinghouse 9080,Westinghouse 8000,Westinghouse 1000 |
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L(Sales Manager)
Tina(Sales Specialist)
Ricardo(Sales Specialist)
Tel:+86 18359251915
Doris(Sales Specialist)
Tel:+86 13599531915
Conditions |
Original Brand New |
Approximate Lead Time |
3-5 days |
Warranty |
One Year |
Online Service |
24 / 7 |
Express Company |
DHL / FedEx / UPS / TNT etc. |
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies