PLC ENGINEERING

1734-VHSC5 Allen Bradley Rockwell CompactLogix 5370 Very High Speed Counter Module

Home

Allen Bradley

1734-VHSC5 Allen Bradley Rockwell CompactLogix 5370 Very High Speed Counter Module

1734-VHSC5 Allen Bradley Rockwell CompactLogix 5370 Very High Speed Counter Module

1734-VHSC5 is a Very High Speed Counter (VHSC) module from Allen-Bradley's POINT I/O product line.

HS CODE : 8538909200

  • Product No :

    1734-VHSC5 1734VHSC5
  • Manufacture :

    Allen Bradley
  • Size (cm) :

    7.6 * 5.6 * 1.2
  • Weight (kg) :

    0.03
  • Origin :

    USA
  • Warranty :

    12 Month
  • Lead Time :

    Ready Stock
  • Description :

    Counter Module

Product parameters

Type: POINT I/O Series Very High-Speed Counter Module

Input channels: 1 group (including A/Aret, B/Bret, Z/Zret inputs)

Output channels: 1 group (2 isolated outputs, current source type, 0.5A @ 5VDC per channel)

Input voltage range: 4.5-5.5 VDC (nominal 5 VDC)

PointBus current: Maximum 180 mA @ 5 VDC

Power dissipation: Up to 1.9W (load-related)

Heat dissipation: Up to 6.5 BTU/hr (load-related)

Isolation voltage: 50 V (continuous), test withstand voltage: 1250 VDC for 60 seconds

Counting resolution: 24-bit binary format, counting range 0 to 16,777,215, stored in a 32-bit register (4 words)

Operating temperature: -20°C to 55°C (-4°F to 131°F)

Storage temperature: -40°C to 85°C (-40°F to 185°F)

Relative humidity: 5% to 95% (no condensation)

Vibration: 5 G @ 10-500 Hz (in compliance with IEC 60068-2-6)

Working shock: 30 G, non-working shock: 50 G (in compliance with IEC 60068-2-27)

Protection grade: IP20 (Open Type)

Installation method: DIN rail (Galvanized or yellow-chromium steel DIN rail is recommended. Ensure grounding.)

Wiring method: Removable terminal block (RTB), supports 1734-TB or 1734-TBS wiring base, applicable wire diameter 0.25- 2.5mm ² (14-22 AWG), temperature grade 75°C or higher, maximum insulation thickness 1.2mm

Certification: C-TICK, CCC, CE, CUL, GOST, KC, MARINE, UL, IECEx Scheme, Registro Italiano Navale (as of March 17, 2025)

ESD immunity: 6 kV contact discharge, 8 kV air discharge (in compliance with IEC 61000-4-2)

Conducted radio frequency immunity: 10 V/m, 200 Hz 50% pulse, 100% AM@900/1890 MHz (in compliance with IEC 61000-4-3)

Key control position: 2

Supported adapters: 1734-ADN (DeviceNet), 1734-AENT (EtherNet/IP), 1734-ACNR (ControlNet), 1734-APB (Profibus)

Function

Ultra-high-speed counting: Supports input signal frequencies up to 1 MHz, suitable for counters, encoders, pulse generators and mechanical limit switches, providing high-precision position and speed feedback.

Multi-mode support: It offers counter, encoder (X1, X2, X4), period/frequency, continuous/frequency, frequency measurement and PWM modes, flexibly adapting to various application scenarios.

Input filtering: Configurable filters (50 Hz, 500 Hz, 5 kHz, 50 kHz or off) are available to eliminate noise and improve counting accuracy.

Signal processing: The input signals are processed through the signal conditioner and function blocks, interacting with the POINT I/O bus to transmit data and commands.

Output control: It provides 2 isolated outputs (0.5A @ 5VDC), supports source-type outputs, and is suitable for controlling external devices.

Modular design: Integrated with the POINT I/O system, supports DeviceNet, EtherNet/IP, ControlNet and Profibus networks, and is compatible with CompactLogix and ControlLogix controllers.

Hot-swappable (RIUP) : Supports module replacement while the system is running, reducing downtime.

Configuration and programming: Configuration is carried out through RSLogix 5000 or Studio 5000 Logix Designer software, and parameter setting is supported by RSNetWorx for DeviceNet software.

DIN rail installation: Use the 1734-TB or 1734-TBS wiring base, key control position 2, compact installation, suitable for space-limited scenarios.

Application scenarios

Manufacturing industry: It is used in conveyor belts, assembly lines, and packaging equipment in factory automation to achieve precise position and speed control of servo motors.

Material handling: Control the positioning of equipment such as conveyor belts and stackers to ensure high-precision movement.

Packaging machinery: It provides high-speed counting and encoder feedback in sealing, labeling and sorting equipment to ensure fast and accurate operation.

Robot system: Provides high-precision position and speed data for robots and supports complex motion trajectories.

Process control: It is used for counting and monitoring high-frequency pulse signals in the chemical and pharmaceutical industries.

Automated testing equipment: Integrated into the testing platform, it is used for high-speed data acquisition of encoders, pulse generators or limit switches.

Advantage Products:

DANFOSS VLT® AutomationDrive,Plus+1®,MCP
KEYENCE KV-800,KV-300,KP-3000,KP-7000,KJ,KV-Nano,HMI
GE FANUC PACSystems RX3i,90-30,90-70
SCHNEIDER Modicon M340,Modicon M580,Modicon X80,Pioneer
BENTLY NEVADA 3500/94,3500/53,3500/22M,3500/42M,330180-90-00
HONEYWELL Experion® PKS,ControlEdge™ ,HC900
ALLEN BRADLEY CompactLogix,ControlLogix, MicroLogix,Flex I/O
WESTINGHOUSE Westinghouse Modbus,Westinghouse 9080,Westinghouse 8000,Westinghouse 1000

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       


Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     


Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]

Conditions

Original Brand New

Approximate Lead Time

3-5 days

Warranty

One Year

Online Service

24 / 7

Express Company

DHL / FedEx / UPS / TNT etc.

MOQ

1 Piece

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

20D-DL2-CKE1
20D-DL2-CKE1 Allen Bradley Powerflex 700S Control Upgrade Kit
20D-DL2-CKE1 is an Allen-Bradley PowerFlex 700S Phase II Drive Control Upgrade Kit used for machine control and system monitoring. HS CODE : 8538909200
More +
22B-D6P0N104
22B-D6P0N104 Allen-Bradley PowerFlex 40 Variable Frequency Drive (VFD)
22B-D6P0N104 is a variable frequency drive (VFD) manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1203-GD1
1203-GD1 Allen-Bradley Remote I/O Communication Module
1203-GD1 is a Remote I/O communications module manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1336F-BRF75-AA-EN DRIVE
1336F-BRF75-AA-EN Allen-Bradley 1336 Plus II Adjustable Frequency AC Drive
1336F-BRF75-AA-EN is an adjustable frequency AC drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1336F-BRF100-AA-EN DRIVE
1336F-BRF100-AA-EN Allen-Bradley 1336 Plus II Adjustable Frequency AC Drive
1336F-BRF100-AA-EN is an adjustable frequency AC drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1408-EM3A-ENT MODULE
1408-EM3A-ENT Allen-Bradley PowerMonitor 1000 Energy Monitor EM3
1408-EM3A-ENT is an energy management meter with Ethernet/IP communications manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1398-DDM-005-DN DRIVE
1398-DDM-005-DN Allen Bradley Ultra Servo Drive
1398-DDM-005-DN is a digital servo drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1398-DDM-005 DRIVE
1398-DDM-005 Allen-Bradley 1398 ULTRA Servo Drives
1398-DDM-005 is a digital servo drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Copyright 2025 @ TZ TECH Co., LTD. .All Rights Reserved Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Sitemap | Blog | XML | Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact

YOUR COOKIE SETTINGS

In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.

Accept and continue Decline cookies