1734-AND Allen-Bradley POINT I/O DeviceNet Adapter Module

Product parameters

Module type: POINT I/O DeviceNet adapter

Network protocol: DeviceNet

Communication rate: 125 kbps, 250 kbps, 500 kbps (configurable)

Node address: 0 to 63 (configured via rotary switch or RSNetWorx software)

I/O capacity: Supports up to 63 POINT I/O modules (up to 504 point I/O)

Power supply requirements:

Backplane power supply: 24V DC (nominal), 10.8-28.8V DC

Backplane current consumption: 425 mA @ 24V DC

On-site power supply: 24V DC, up to 10A (for power supply of I/O modules)

Power consumption: 4.5W (maximum)

Heat dissipation: 15.4 BTU/hr @ 28.8V DC

Isolation voltage: 50V (continuous), basic insulation type

Operating temperature: -20°C to 55°C (-4°F to 131°F)

Storage temperature: -40°C to 85°C (-40°F to 185°F)

Humidity: 5% to 95% (non-condensing)

Installation method: DIN rail installation

Certification: UL, cULus, CE, C-Tick, in compliance with industrial standards

Software support: RSNetWorx for DeviceNet (Network configuration), RSLogix 5000 or Studio 5000 (PLC integration)

Latest firmware: Supports AutoStart and AutoMap functions

Installation method: DIN rail installation, installed side by side with the POINT I/O module

Function

DeviceNet network interface: Connect the POINT I/O module to the DeviceNet network, supporting polling, state change and circular data exchange.

I/O expansion: Supports up to 63 POINT I/O modules, with a maximum of 504 points of I/O, suitable for distributed control systems.

AutoStart and AutoMap: Simplify network configuration, automatically map I/O points, and reduce debugging time (supported by Series B firmware).

Diagnostic function: It provides LED for network status, module status and I/O status, facilitating fault detection.

Modular design: Seamlessly integrated with POINT I/O modules (such as 1734-IB8, 1734-OB8), supporting flexible I/O configuration.

Flexible power supply: Provides 24V DC field power supply to support the power supply requirements of various I/O modules.

Application scenarios

Distributed I/O control: In the manufacturing industry, POINT I/O modules are integrated with PLCS (such as 1756-L65) or drivers (such as PowerFlex 750) through the DeviceNet network to control sensors and actuators.

Production line automation: Manage distributed digital and analog I/O points in automotive manufacturing, packaging or material handling (such as in conjunction with 1746sc-INI4VI).

Process control: In water treatment or food processing, monitor and control the status of distributed equipment.

Equipment monitoring: In conjunction with the XM module (such as 1440-VST02-01RA), it transmits vibration or eccentricity data through the DeviceNet network.

MCC integration: Collaborate with the medium-voltage motor control center (such as 1503VC-BMC4) through the DeviceNet network to control the start and stop of the motor.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]