IC693MDL931 GE Fanuc 90-30 Discrete I/O Module

Product parameters

Module type: Isolation relay output module, compatible with Series 90-30

Output channels: 8 isolation relay outputs (4 normally closed, 4 Form C double-throw)

Rated voltage: DC: 24VDC

Ac: 120/240 VAC (50/60 Hz)

Operating voltage range: DC: 5 to 30 VDC

Ac: 5 to 250 VAC (50/60 Hz)

Output current: Maximum 8A per channel (resistive load)

The maximum total current of the module is 20 A (UL installation).

Isolation: 1500V isolation between channels and from the logic side

Response time: 15 ms on/off

Backplane current consumption: 5V: 6mA (all outputs are on)

24 V: 70 mA (All outputs enabled)

Terminal blocks: 20 screw terminals, supporting 14 to 24 AWG wires

Operating temperature: 0 to 60°C

Indicator: 8 green leds, showing the output status of each channel

Function

Hybrid relay configuration: Provides 4 normally closed and 4 Form C double-throw relay outputs to meet various control requirements.

Independent isolation: Each relay output is independently isolated to prevent interference between channels and is suitable for loads of different voltage levels.

Wide voltage support: Compatible with 5-30VDC and 5-250VAC, suitable for both AC and DC loads.

LED status indication: The top 8 leds display the on/off status of each channel, facilitating debugging and monitoring.

Modular design: It can be installed in any I/O slot of the Series 90-30 PLC and supports flexible configuration.

User power supply: An external AC or DC power supply is required to drive the load equipment, and there is no built-in fuse.

Application scenarios

Industrial automation: It is used to control equipment such as solenoid valves, motor starters, and indicator lights on production lines.

Process control: Applicable to industries such as chemical engineering, power, oil and gas, etc., for controlling high-power loads.

Hybrid load control: The combination of normally closed and double-throw contacts is suitable for scenarios that require different switching logics.

Renovation of old systems: Supports multi-voltage loads and is suitable for upgrading old control systems.

Distributed control: As a distributed I/O component of the Series 90-30 PLC, it is used for remote load control.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]