IC693MDL310 GE Fanuc 90-30 Discrete I/O Module

Core parameters

Input points: 16 channels, DC input type

Rated input voltage: DC 24V (compatible with a wide range of DC 10 to 30V)

Signal threshold

Signal "0" (OFF) : ≤5V DC

Signal "1" (ON) : ≥10V DC

Input current: Typical value per channel is 7mA (at 24V), maximum 10mA

Input delay: Default ≤1ms (Filtering can be adjusted through external circuits or programming to suppress high-frequency interference)

Isolation method: The entire module is isolated from the backplane bus (isolation voltage 1500V AC, 1 minute), and there is no isolation between channels

Working environment: Working temperature 0~60℃, storage temperature -40 ~+85℃. Humidity: 5% to 95% (non-condensing)

Power consumption: The maximum backplane bus current is 30mA (5V DC), and there is no need for an external power supply

Function

Wide voltage compatibility: Supports DC 10 to 30V input, compatible with different specifications of DC 24V sensors (such as photoelectric switches, proximity sensors), and compatible with multiple brand devices.

Fast signal response: With a default input delay of ≤1ms, it can quickly capture high-frequency switching signals (such as workpiece detection on high-speed conveyor belts), avoiding signal loss.

Reliable isolation protection: The module is electrically isolated from the PLC backplane bus, reducing the impact of voltage fluctuations or ground interference from external devices on the host and enhancing the stability of signal acquisition.

Easy to integrate and maintain: Specifically designed for MicroLogix 1000/1100/1200 series PLCS, it is directly connected via the backplane bus and automatically allocates addresses. Compact in size (approximately 32mm×110mm×100mm in width × height × depth), it saves space in the control cabinet.

Application scenarios

Small and medium-sized production lines: Connect DC 24V limit switches and photoelectric sensors to collect signals on the arrival of workpieces and the start and stop status of equipment in packaging machines and assembly lines.

Single-machine equipment monitoring: It is used for collecting signals such as safety door switches, emergency stop buttons, and cylinder position feedback for machine tools and injection molding machines to ensure the safe operation of the equipment.

Logistics conveying system: In small conveyor belts and sorting equipment, the position signals of photoelectric beam sensors and encoders are collected to achieve material positioning and counting.

Automation transformation project: When installing PLC control for traditional equipment (such as old punch presses and textile machines), it serves as an input expansion module to achieve digital signal collection at a low cost.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!