5069-L3100ERS2 Allen Bradley Rockwell CompactLogix Controller

Product parameters

Product type: Allen-Bradley 5069-L3100ERS2, Compact GuardLogix 5380 Safety Controller

User memory: 10 MB (Standard memory)

Safe memory: 5 MB

Number of supported tasks: 32 tasks (31 standard tasks + 1 security task), with each task supporting 1000 programs

Support for I/O modules: Up to 31 local Compact 5000 I/O modules (supporting a mixture of standard and secure I/O)

EtherNet nodes: Up to 90 EtherNet/IP nodes

Socket interface: up to 32

Communication port:

2 Ethernet ports (supporting 10/100 Mbps and 1 Gbps, full-duplex)

One USB 2.0 port (with a transmission rate up to 12 Mbps)

Network topology: Supports linear, star and device-level ring networks (DLR)

Safety level: SIL 2/PLd (Safety Integrity Level 2, Performance Level d)

Backplane current

At 5V DC: 450 mA

At 24V DC: 225 mA

Power consumption: Maximum 10 W

Heat dissipation: Maximum 34.1 BTU/ hour

Module power supply (MOD power supply) : 18-32V DC, maximum 800 mA

Sensor/Actuator power supply (SA power supply) : 18-32V DC, maximum 10 A

Installation method: DIN rail installation

Operating temperature: 0 to 60°C (32 to 140°F)

Storage temperature: -40 to 85°C (-40 to 185°F)

Relative humidity: 5% to 95% (non-condensing)

Vibration resistance: 2g (10 to 500 Hz)

Operating impact: 30g

Non-operational impact: 50g

Environmental requirements: Comply with ATEX/IECEx Zone 2 certification. It needs to be installed in a cabinet with at least IP54 grade, and the pollution level does not exceed 2 (EN/IEC 60664-1).

Certifications: CE, UL, CSA, RCM, ATEX, IECEx, ODVA, Korean KC, etc

Lifecycle status: Active

Function

Safety and Standard Control: Integrates the standard control function of CompactLogix 5380, supports SIL 2/PLd safety level, and is suitable for the mixed control of standard and safety tasks.

Programming support:

Standard tasks: Support ladder diagram (LD), Structured text (ST), Function Block Diagram (FBD), and Sequential Function Diagram (SFC).

Security task: Configure through Studio 5000 Logix Designer using ladder Diagram (RLL) and dedicated security instructions.

EtherNet communication: Dual Ethernet ports support EtherNet/IP, providing 1 Gbps high-speed communication, supporting CIP Security (Studio 5000 v34 or higher version), and compatible with linear, star and DLR topologies.

Local and distributed I/O

Support up to 31 local Compact 5000 I/O modules (a mixture of standard and secure I/O).

Support distributed I/O through 5069-AEN2TR or 5069-AENTR Ethernet adapters.

Non-volatile storage: Equipped with a 2GB standard SD card (1784-SD2), and supports optional 8GB (1784-SDHC8), 32GB (1784-SDHC32) or 4GB CodeMeter CmCard (9509-CMSDCD4).

Diagnosis and Security: Provide controller status display, fault diagnosis, role-based access control and change detection to ensure system security and reliability.

Modular design: Supports hot plugging, simplifies system expansion and maintenance, and is compatible with Compact 5000 I/O modules.

Application scenarios

Manufacturing industry

Automobile manufacturing: Control robots and assembly lines to ensure safety and precise control.

Packaging machinery: Drives high-speed packaging equipment, supports safe shutdown and synchronous control.

Process industry

Food and Beverages: Achieve safety control and high-speed data collection to optimize production efficiency.

Pharmaceuticals: Meet strict safety and compliance requirements and control production equipment.

Logistics and Warehousing

Automated warehouse: Controls the sorting system and conveyor belts, supporting distributed I/O and security functions.

AGV system: Achieving safe navigation and motion control.

Energy and Infrastructure

Power distribution: Monitor and control distribution equipment to ensure safe operation.

Water treatment: Control pumping stations and valves, supporting real-time communication and safety protection.

Medium security requirement applications: Suitable for scenarios that require SIL 2/PLd security levels, such as small and medium-sized automation systems or hybrid control environments.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]