1794-IB16XOB16P Allen-Bradley Rockwell FLEX I/O Combination Module

Product parameters

General parameters

Module type: Flex I/O Digital Quantity Combination Module (16-point input + 16-point output)

Installation method: DIN rail installation, which needs to be used in conjunction with the terminal base (such as 1794-TB32, 1794-TB32S)

Protection grade: IP20 (Suitable for indoor industrial environments)

Operating temperature: 0°C to 55°C

Storage temperature: -40°C to 85°C

Relative humidity: 5% to 95% (non-condensing)

Power consumption: Maximum 7W (at 31.2V DC)

Heat dissipation: Up to 23.9 BTU/ hour (at 31.2V DC)

Flexbus current: 80 mA @ 5V DC

Isolation voltage: 50V (There is basically insulation between the channel and the system, and no isolation between the channels)

Input parameters

Input points: 16 points, 24V DC leak type (Sinking)

Nominal input voltage: 24V DC

Input voltage range: 10V DC to 31.2V DC

Voltage in ON state:

Minimum: 10V DC

Maximum: 31.2V DC

Current in ON state:

Minimum: 2 mA (at 10V DC)

Nominal: 4.1mA (at 24V DC)

Maximum: 6 mA (at 31.2V DC)

Input impedance: Maximum 5.9 kΩ

Input filtering time: Configurable (Typical values are 0.5ms, 1ms, 2ms, etc., specifically set through software)

Output parameters

Output points: 16 points, 24V DC Sourcing

Nominal output voltage: 24V DC

Output voltage range: 10V DC to 31.2V DC

Output current per channel: Maximum 0.5A

Total output current of the module: up to 8 A

Voltage drop in ON state: Up to 0.5V DC (at 0.5A)

Leakage current (OFF state) : Maximum 0.5 mA

Electronic protection: Supports electronic fuse protection to prevent overload and short circuit

Response time: Typical value < 0.5 ms (from input to output)

Communication and Compatibility

Supported protocols: EtherNet/IP, ControlNet, DeviceNet, etc. are supported through the Flex I/O adapter

Compatible controllers: FlexLogix, CompactLogix, ControlLogix, etc

Terminal base requirements: A 1794-TB32 or similar base is needed to support wiring

Function

Combined input/output

It provides 16 24V DC drain type inputs and 16 24V DC source type outputs, reducing the number of modules and optimizing the space of the control cabinet.

The input supports devices such as sensors and switches, and the output drives actuators such as relays, solenoid valves, indicator lights, etc.

Electronic protection

The output terminal is equipped with built-in electronic fuse protection to prevent overload or short circuit and enhance the reliability of the system.

The module supports diagnostic functions and the input/output status can be detected through the controller.

Flexible configuration

The input filtering time can be adjusted through software (such as Studio 5000) to adapt to different signal response requirements.

Supports 2-wire or 4-wire connection and is compatible with a variety of industrial equipment.

Distributed I/O support:

Communicate with the controller through the Flex I/O adapter (such as the 1794-AENT Ethernet adapter), which is suitable for the distributed control architecture.

Support multiple industrial communication protocols and be compatible with the integrated architecture of Rockwell Automation.

Compact design

Modular design, easy to install on DIN rails, suitable for control cabinets with limited space.

Supports hot plugging (operation must be carried out under safe conditions) for easy maintenance.

High reliability

Industrial-grade design, adaptable to harsh environments (such as vibration and temperature changes).

The channel is isolated from the system to reduce the impact of electromagnetic interference.

Application scenarios

Manufacturing industry: It is used in automated production lines, connecting sensors (such as photoelectric sensors, limit switches) to detect the position of workpieces and driving actuators (such as cylinders, motor starters) to complete action control.

Process control: Applied in water treatment, food and beverage, chemical and other industries, it monitors signals such as liquid level and pressure, and controls equipment such as pumps and valves.

Distributed control system: In large factories (such as steel and energy), it serves as a remote I/O module and communicates with the central controller via EtherNet/IP or ControlNet.

Space-constrained environment

The compact design is suitable for small control cabinets or modular equipment, reducing the space occupied by hardware.

General automation: Applicable to various industrial scenarios, such as HVAC systems and conveyor belt control, it supports signal processing for general devices like buttons and indicator lights.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]