1769-L18ER-BB1B Allen-Bradley CompactLogix 5370 L1 Ethernet Processor Module

Product parameters

Module Type: CompactLogix 5370 L1 Programmable Automation Controller (PAC)

User memory: 512 KB (Embedded user memory)

Non-volatile memory

Standard configuration: 1 GB SD card (1784-SD1)

Supports up to 2 GB SD cards (1784-SD2)

Communication port:

2 EtherNet ports (supporting Ethernet /IP, 10/100 Mbps, built-in switch function, supporting linear, device-level ring network (DLR) and star topology)

One USB port (for temporary connection, programming and debugging)

Embedded I/O

16 24VDC digital inputs (submerged type, 10-30VDC)

16 24VDC digital outputs (source-output type, 10-30VDC)

Expansion capability:

Support up to 8 1734 POINT I/O modules (via the POINT I/O backplane)

It supports up to 8 Ethernet /IP nodes at most

It supports up to 256 controller connections at most

Supports up to 4 Ethernet nodes (IP addresses)

Tasks and procedures:

Supports up to 32 controller tasks

Each task supports up to 100 consecutive or periodic programs

Power supply:

Input voltage: 24 VDC (Only for Class 2 power supply, range 10-30 VDC)

Maximum current consumption: Not explicitly specified. Please refer to the user manual

Installation method: DIN rail or panel installation

Operating temperature: -20 to 60°C (-4 to 140°F)

Storage temperature: -40 to 85°C (-40 to 185°F)

Relative humidity: 5% to 95% (no condensation)

Certifications: UL, CSA, CE, ATEX, China CCC, Korean KC, Australian RCM, Registro Italiano Navale

Status indication: LED indicator light

Firmware version: Supports v36.011

Component Number: 10612598968654

Function

High-performance control

It supports 32 controller tasks, with each task capable of running 100 programs, making it suitable for real-time multi-task control.

512 KB of user memory and 1 GB of non-volatile memory (expandable to 2 GB), supporting complex programs and data storage.

Embedded I/O

It is equipped with 16 built-in 24VDC digital inputs (built-in type) and 16 24VDC digital outputs (source-out type), enabling it to handle basic control tasks without the need for additional I/O modules.

It supports point-to-point diagnostic status indication, facilitating fault detection.

Communication capability:

Dual EtherNet ports support EtherNet/IP, built-in switch function, and support device-level ring network (DLR) to enhance network redundancy and reliability.

Support Modbus TCP and other devices (such as printers, barcode readers, servers) through open sockets.

The USB port is used for temporary programming and debugging.

Scalability

Supports up to 8 1734 POINT I/O modules, with moderate expansion capability and suitable for small-scale distributed systems.

Supports connection with PowerFlex drives and other devices via Compact I/O (such as DPI/SCANport, DSI/Modbus modules).

Programming and Integration

Program using the Studio 5000 Logix Designer and share consistent network protocols and information functions with other Logix controllers.

It supports functions such as online editing and forced operation, and is suitable for dynamic adjustment and debugging.

Motion control

Supports up to 2-axis motion control (via EtherNet/IP), suitable for simple joint robot applications.

Safety and Reliability

Support DLR network topology to enhance communication redundancy.

The software keying prevents the module from being installed incorrectly.

Application scenarios

Manufacturing industry: In automotive, food processing or electronic assembly production lines, control conveyor belts, robots or packaging equipment to handle discrete input/output tasks.

Process control: In small chemical or pharmaceutical factories, monitor and control valves, pumps or sensors, supporting PID regulation and data acquisition.

Material handling: In warehousing or logistics systems, manage automated sorting, conveyors or stackers, supporting real-time I/O control.

Energy management: In renewable energy or power distribution systems, controlling load regulators or monitoring the status of equipment.

HVAC and Environmental Control: In building automation, control air doors, pumps or heaters, and integrate Ethernet communication and SCADA systems.

OEM equipment: Embedded control solutions, suitable for OEM equipment manufacturers (such as packaging machines, injection molding machines), providing compact and cost-effective control.

System upgrade: Replace the old PLC-5 system (such as the 1771 series modules you mentioned earlier) to provide modern Ethernet communication and higher performance.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]