1756-OV16E Allen Bradley Rockwell Digital DC Output Module

Product parameters

Product model: 1756-OV16E

Type: Digital Output Module (DC electronic fuse type output)

Output points: 16 points (8 points per group, a total of 2 groups)

Output type: 12/24V DC Sinking (Sinking)

Working voltage range: 10-30V DC

Output current:

Maximum current at each point: 1 A @ 60°C

Total module current: 8 A @ 60°C

Conduction state voltage drop: Up to 700 mV DC@1 A

Off-state leakage current: Maximum 1 mA at each point

Minimum load current: 2 mA per point

Surge current: 2 A at each point, lasting for 10 ms, repeating every 2 seconds

Isolation voltage:

Output to the backplane: 250V (Basic insulation, test voltage 1350V AC, lasting for 2 seconds)

Inter-group isolation: 250V

Operating temperature range: 0-60°C (32-140°F)

Working humidity: 5-95% (no condensation)

Impact rating: 30G

Vibration level: 2G @ 10-500 Hz

Installation method: Install on ControlLogix racks (compatible with 1756-A4, A7, A10, A13, A17)

Connector: 20-pin removable terminal block (RTB, such as 1756-TBNH or 1756-TBSH)

Certifications: CE, CSA, KC, MARINE, NRTL, RCM, UL

Temperature code: T4 (North American and ATEX standards)

Shell type: Open Enclosure

UPC: 612598264360

GTIN: 00612598264360

Function

Electronic fuse protection

Each output group is equipped with an electronic fuse function, which can protect the module from overload or short circuit damage, enhancing the system's operating time and reliability.

The circuit breaker can be configured and reset through software (such as Studio 5000) without the need for physical replacement.

Digital output control

It provides 16 submerged DC outputs and is suitable for driving 12/24V DC devices such as relays, indicator lights, solenoid valves or motor starters.

Support point-level configuration, allowing each output point to independently set the status in failure mode or program mode (such as ON, OFF, or remain in the final state).

High-performance signal processing

The output delay time is short (75 µs from OFF to ON, 360 µs from ON to OFF), making it suitable for control systems that require rapid response.

Support Output Data Echo to ensure that the output status is consistent with the controller instructions.

Status monitoring: It provides LED indications for output status, fuse status, communication status and module health status, facilitating on-site diagnosis.

Network integration

Supports ControlNet or EtherNet/IP networks and can be used as a local or remote I/O module to communicate seamlessly with the ControlLogix controller.

Supports hot plugging (RIUP), which is convenient for maintenance and replacement.

Flexible configuration

It is configured through the Studio 5000 software and supports multiple functions, such as no-load detection, output verification detection, failure mode conversion, etc.

The output states in configurable fault mode and program mode can be configured to enhance system flexibility.

Application scenarios

Industrial automation control

It is used to control actuators, solenoid valves, indicator lights or small motor starters in the production line, and is suitable for manufacturing, automotive assembly, packaging and other industries.

The electronic fuse function ensures the protection of the system in case of overload or short circuit, reducing downtime.

Process control

In industries such as petrochemical, power or water treatment, it is used to drive low-power DC equipment to ensure reliable signal output.

The isolation design of the module is suitable for process control systems that require high reliability and safety.

Distributed control system: Through ControlNet or EtherNet/IP networks, modules can be integrated into large-scale distributed control systems as remote I/O components, suitable for factory automation or cross-regional control.

High-reliability scenarios: The electronic fuse and status monitoring functions of the module make it suitable for applications with high availability requirements, such as critical infrastructure or continuous production processes.

Testing and Measurement: In test equipment, it is used to control DC-driven test instruments or actuators, and the fast signal response time meets the requirements of high dynamic testing.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]