1734-IV2 Allen Bradley Rockwell CompactLogix 5370 Source I/O Module

Product parameters

Module type: POINT I/O Digital DC (DC) Source Input Module

Number of input channels: 2 Sourcing input channels

Input voltage:

Nominal input voltage: 24V DC

Input voltage range: 10-28.8V DC

Input current:

Conduction state

Minimum 2 mA @ 10V DC

Nominal 4 mA @ 24V DC

Maximum 5 mA @ 28.8V DC

Off status: Maximum 1.5mA

Turn-off voltage: Maximum 5V DC

Input impedance:

Nominal 3.6k Ω

Maximum 4.7k Ω

Power supply:

Maximum POINTBus current: 75 mA @ 5V DC

External DC power supply: 12/24V DC (provided by the internal field power bus)

Power consumption:

Maximum power dissipation: 1 W @ 28.8V DC

Maximum heat dissipation: 3.4 BTU/hr @ 28.8V DC

Isolation voltage: 50V (continuous), test voltage is 2500V DC, lasting for 60 seconds

Installation method: DIN rail installation (It is recommended to use galvanized yellow chromium steel rail)

Wiring method: Detachable terminal block (RTB), supporting 0.25- 2.5mm ² (22-14 AWG) solid or stranded copper wire, rated temperature 75°C (167°F) or higher, maximum insulation thickness 1.2mm

Terminal screw torque: 0.8 N·m (7 lb·in)

Operating temperature range: -20°C to 55°C (-4°F to 131°F)

Storage temperature range: -40°C to 85°C (-40°F to 185°F)

Protection grade: Open type (no enclosure, IP20)

Compatible terminal bases: 1734-TB, 1734-TBS

Key switch position: 1

Supported networks: ControlNet, DeviceNet, EtherNet/IP and other open networks

Certification standards: C-TICK, CE, CUL, GOST, KC, MARINE, UL

Relative humidity: 5-95% (non-condensing)

Vibration: 5 g @ 10-500 Hz during operation

Impact: 30 g during operation, 50 g during non-operation

Surge transient immunity: ±1 kV line-to-line on signal port, ±2 kV line-to-ground (CM)

Function

Digital source input processing

It provides two source input channels, receiving 10-28.8V DC signals, and is compatible with 2-wire or 3-wire proximity switches, sensors or other digital devices.

Supports high-precision signal detection and is suitable for 24V DC industrial environments.

Compact design: As the source input module with the fewest channels in the POINT I/O series, it is small in size and suitable for high-density installation and space-constrained scenarios.

Modular design

Compatible with POINT I/O communication adapters (such as 1734-AENT, 1734-ADN), and supporting distributed I/O architecture.

Detachable terminal blocks (RTB) simplify wiring, installation and maintenance.

Status monitoring

Equipped with module status, network status and status indicator lights for each input channel:

Module status: No power (off), normal operation (green constantly on), requires configuration (green flashing), Recoverable fault (red flashing), Non-recoverable fault (red constantly on), self-check (red and green alternating flashing).

Network status: Offline (off), online no connection (green flashing), online connected (green constantly on), communication failure (red/green alternating flashing).

Input status: Input activated (yellow constantly on), not activated (off).

Convenient for real-time monitoring and rapid fault diagnosis.

Flexible filtering: It offers 0.5ms fixed hardware filtering and 0-65ms user-configurable digital filtering to meet different signal response requirements.

Data communication

Generate 1 byte of input data (received by the scanner) without consuming the output data.

Data is mapped to the memory of the main controller, supporting efficient I/O data exchange.

Support for hot plugging (RIUP) : Allows modules to be replaced while the system is running, reducing downtime.

Low power consumption and high isolation

The maximum power dissipation is 1 W, suitable for energy-saving systems.

50V continuous isolation ensures the safe separation of on-site signals from the system side.

Application scenarios

Industrial automation: Used in PLC or PAC systems, it receives 24V DC signals from proximity switches, limit switches, buttons, and sensors (such as photoelectric sensors), and is suitable for factory production line control.

Manufacturing industry: In industries such as automotive manufacturing, food and beverage, and packaging machinery, it monitors the status of equipment or trigger signals, such as conveyor belt sensors or mechanical limit switches.

Distributed I/O system: In large factories, combined with POINT I/O communication adapters, it reduces wiring costs and enhances system scalability.

Space-constrained environments: The compact design makes it suitable for installation on small control cabinets or DIN rails close to on-site equipment.

Low-density signal acquisition: Suitable for scenarios that only require a small amount of input signals, such as condition monitoring of small devices or subsystems.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]