1734-IE2V Allen Bradley Rockwell CompactLogix 5370 Analog I/O Module

Product parameters

Module type: POINT I/O Analog Voltage Input Module

Number of input channels: 2 single-ended, non-isolated voltage input channels

Resolution: 16-bit (across 0-10V or ±10V), 15-bit signed integer (-32,768 to +32,767)

Input impedance: 100 kΩ

Accuracy: 0.1% full scale @ 25°C (77°F)

Temperature drift: 5 ppm/°C

Conversion type: Delta-Sigma conversion

Power supply:

External DC power supply voltage range: 10-28.8V DC, nominal 24V DC

Maximum POINTBus current: 75 mA @ 5V DC

Power consumption:

Maximum power dissipation: 0.75 W @ 28.8V DC

Maximum heat dissipation: 2.5 BTU/hr @ 28.8V DC

Isolation voltage: 50V (continuous), test voltage is 2550V DC, lasting for 60 seconds (from site to system)

Installation method: DIN rail installation (It is recommended to use galvanized yellow chromium steel rail)

Wiring method: Detachable terminal block (RTB), it is recommended to use 0.25- 2.5mm ² (22-14 AWG) solid or stranded copper wire, rated temperature 100°C (212°F), insulation thickness 1.2mm

Terminal screw torque: 0.8 N·m (7 lb·in)

Operating temperature range: -20°C to 55°C (-4°F to 131°F)

Protection grade: Open type (no enclosure, IP20)

Compatible terminal bases: 1734-TB, 1734-TBS, 1734-TOP, 1734-TOPS

Key switch position: 3

Supported networks: ControlNet, DeviceNet, EtherNet/IP and other open networks

Certification standards: C-TICK, CE, GOST, KC

Function

Analog voltage input processing

Supports 2 single-ended, non-isolated voltage input channels, receiving analog signals ranging from 0 to 10V or ±10V.

Through the built-in Delta-Sigma analog-to-digital converter, the analog signal is converted into a 16-bit signed integer for processing by the controller.

Flexible configuration

The input range can be configured through software as 0-10V or ±10V, supporting both unipolar and bipolar modes.

Support channel-level engineering unit scaling and over-range/under-range detection.

Modular design

Compatible with POINT I/O series communication adapters (such as 1734-AENT, 1734-ADN), it is suitable for distributed I/O systems.

Detachable terminal blocks (RTB) simplify wiring and maintenance.

Compact and efficient

Compact in size, it is suitable for control cabinets with limited space.

Low-power design (0.75W) reduces energy consumption.

Status monitoring: Provide status indicator lights for modules, networks and input channels to facilitate real-time monitoring and fault diagnosis.

High compatibility: Seamlessly integrated with Allen-Bradley Logix series controllers (such as CompactLogix, ControlLogix), suitable for a variety of industrial automation platforms.

Application scenarios

Industrial automation: It is used in PLC or PAC systems to receive voltage signals from transmitters, sensors or instruments, and is suitable for monitoring process variables such as flow rate, temperature, pressure, liquid level, concentration, turbidity, viscosity and speed.

Process control: In industries such as chemical engineering, oil and gas, pharmaceuticals, and water treatment, analog signals are processed to achieve precise process monitoring and control.

Manufacturing industry: In industries such as automotive manufacturing, food and beverage, and packaging machinery, it is used to monitor and control key parameters on the production line.

Distributed I/O system: In large factories or facilities, combined with POINT I/O communication adapters, it reduces wiring costs and enhances system flexibility.

Closed-loop control: By receiving analog signals and combining the PID (Proportional-integral-Derivative) control algorithm, a fully automatic closed-loop control system is achieved, such as temperature regulation or pressure control.

Space-constrained environments: The compact design makes it suitable for installation on small control cabinets or DIN rails close to on-site equipment.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]