1734-IB8 Allen-Bradley POINT I/O 8 Point Digital Input Module

Product parameters

Product type: POINT I/O Digital Input Module

Input points: 8 points, current absorption (Sinking)

Input voltage:

Nominal: 24V DC

Range: 10-28.8V DC

On-state current

Minimum: 2 mA

Nominal name: 4 mA

Maximum: 5 mA

On-state voltage

Minimum: 10V DC

Nominal: 24V DC

Maximum: 28.8V DC

Off-state voltage: Up to 5V DC

Off-state current: minimum 1.5 mA

Input impedance:

Nominal: 3.6k Ω

Maximum: 4.7k Ω

Input filtering time:

Fixed hardware filtering: 0.5 ms

User-configurable filtering: 0-63 ms (ON to OFF and OFF to ON)

Backplane current: 75 mA @ 5V DC

Power consumption: Up to 1.6W @ 24V DC

Heat dissipation: Up to 5.5 BTU/hr

Isolation voltage: 50V (continuous), enhanced insulation, test between the field side and the system @ 2500V DC for 60 seconds

Terminal block: Removable terminal block (1734-TB or 1734-TBS)

Installation method: DIN rail installation (35mm)

Protection grade: IP20 (Open Type)

Operating temperature: -20°C to 55°C (-4°F to 131°F)

Storage temperature: -40°C to 85°C (-40°F to 185°F)

Relative humidity: 5-95%, non-condensing

Certifications: UL, cUL, CE, C-TICK, CCC, KC, MARINE

Function

High-density input: It provides 8 non-isolated 24V DC absorption input channels, suitable for high-density input signal applications.

Configurable filtering: Each channel supports independent ON/OFF signal filtering (0-63 ms) to prevent false triggering caused by noise or switch jitter.

Status indication: Equipped with 8 yellow input status leds, module status leds and network status leds for convenient real-time monitoring.

Modular design: Compatible with POINT I/O communication adapters (such as 1734-AENT, 1734-AENTR), and supports distributed I/O architecture.

Simple installation: With removable terminal blocks (RTB) and DIN rail mounting, wiring and maintenance are simplified.

Compatibility: Supports network protocols such as EtherNet/IP and DeviceNet, and is integrated into ControlLogix or CompactLogix systems.

Application scenarios

Factory automation: It is used in production lines (such as automobiles, food and beverages, packaging) to connect sensors, switches and other devices and monitor discrete input signals.

Distributed Control System (DCS) : In large factories or cross-regional systems, it serves as a remote I/O module and is connected to the EtherNet/IP network.

Material handling: Control the sensor signals of conveyor belts, elevators or storage systems to ensure real-time status monitoring.

Process control: In the water treatment, chemical or power industries, monitor the status of digital equipment (such as limit switches, buttons).

Equipment renovation: Upgrade the old system, connect traditional input devices to the modern EtherNet/IP network, and enhance the level of automation.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]