1440-VST02-01RA Allen Bradley Dynamic Measurement Module

Product parameters

Module type: XM-120 Dynamic Measurement Module (Eccentricity Monitoring)

Input channels: 2 channels, supporting non-contact eddy current probes

Measurement type:

Peak-to-Peak Eccentricity

Max-Gap, maximum instantaneous DC voltage

Minimum gap (Min-Gap, minimum instantaneous DC voltage)

Instantaneous Gap (Gap, instantaneous DC voltage)

Input signal range: -24V DC to 0V DC (input by eddy current probe)

Resolution: 16 bits

Sampling rate: Up to 100 Hz per channel (configurable)

Network Protocol: DeviceNet (supports polling, state change and circular data exchange)

Power consumption:

300 mA @ 24V DC (Powered by DeviceNet)

Operating temperature: -20°C to 65°C (-4°F to 149°F)

Storage temperature: -40°C to 85°C (-40°F to 185°F)

Humidity: 5% to 95% (non-condensing)

Installation method: DIN rail or panel installation

Certification: UL, cULus, CE, C-Tick, in compliance with industrial standards

Software support: RSNetWorx for DeviceNet (for network configuration), RSLogix 5000 or Studio 5000 (for data integration)

Compatibility: Integrated with platforms such as ControlLogix, SLC 500, PLC-5, etc. through DeviceNet

Installation method: DIN rail or panel installation. Wiring and heat dissipation space need to be considered

Function

Eccentricity monitoring: Measure the eccentricity (shaft offset) of rotating machinery to detect potential mechanical faults or imbalances.

Support for eddy current probes: Accept input from non-contact eddy current probes and provide high-precision clearance and eccentricity data.

DeviceNet communication: Communicate with PLC (such as 1756-L65) or HMI through the DeviceNet network, supporting real-time data transmission and alarm.

Diagnostic functions: Provide peak-to-peak eccentricity, maximum/minimum clearance and instantaneous clearance measurement, and support preventive maintenance.

Flexible configuration: Configure measurement parameters and network Settings via RSNetWorx for DeviceNet.

Modular design: As part of the XM series, it can be integrated with other XM modules (such as the XM-220 dual-speed module) to expand monitoring capabilities.

Application scenarios

Rotating machinery monitoring: In pumps, compressors, turbines or motors, monitor shaft eccentricity and clearance to prevent mechanical failures.

Process control: In the oil and gas, chemical or power generation industries, monitor the health status of key rotating equipment.

Preventive maintenance: By using real-time eccentricity data, predict equipment wear or failure to reduce downtime.

Distributed system: Integrated with ControlLogix (1756-L65) or PowerFlex drives (equipped with 20-750-DENC-1) through the DeviceNet network for comprehensive device management.

Industrial automation: In manufacturing, it works in conjunction with PLCS and drivers to ensure the efficient operation of rotating equipment.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]