Bently Nevada 330100-90-00 3300 Proximitor Sensor, 8 mm, 9.0 m Total Length, 3300 Series

The 330100-90-00 is a Bently Nevada 3300 Series Proximitor Sensor designed to operate as part of an 8 mm eddy-current proximity measurement system.

The sensor converts the probe's measurement of the distance between the probe tip and a conductive shaft or target surface into a proportional electrical output. This enables reliable monitoring of both static shaft position and dynamic vibration, as well as speed and Keyphasor-related measurements.

The “-90” configuration specifies a 9.0 m (29.5 ft) total system length, while the “-00” configuration indicates that no additional agency approval option is required. The 3300 system was designed to provide interchangeability between the probe, extension cable and Proximitor Sensor without individual component matching or bench calibration.

Main Features

• Bently Nevada 3300 Series Proximitor Sensor
• 8 mm eddy-current proximity measurement system
• Non-contact displacement measurement
• Supports static position and dynamic vibration monitoring
• Suitable for speed and Keyphasor applications
• 9.0 m (29.5 ft) total-length configuration
• Stable output over a broad operating-temperature range
• Designed for use with Bently Nevada 3300 proximity probes and extension cables
• Suitable for critical rotating machinery monitoring

Typical Applications

• Steam and gas turbines
• Compressors
• Pumps
• Motors and generators
• Industrial rotating machinery
• Shaft vibration monitoring
• Shaft position monitoring
• Speed measurement
• Keyphasor applications
• Predictive and condition-based maintenance

Discontinued / Obsolete – Available through surplus, excess inventory and refurbished channels

Recommended Replacement: Bently Nevada 330180-90-00 – 3300 XL Proximitor Sensor

The 3300 XL Proximitor Sensor is the newer-generation design and is described as mechanically and electrically interchangeable with the non-XL version for many applications. Nevertheless, for a critical machinery monitoring system, verify the complete probe, extension cable, mounting arrangement and system requirements before substitution.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!