4100-234-R Allen-Bradley Rockwell Compact Motion Controller

Product parameters

Product type: IMC-S/234 Compact motion controller, 4-axis, standalone

Processor: Intel i960 microprocessor, 16 MHz

Power supply:

Input voltage: 90-132V AC or 175-264V AC, 47- 63Hz, maximum current 3A

I/O power input: 5-40V DC (nominal 24V), maximum current 3A, with 3A slow-fuse fuse (1/4 x 1-1/4 inch)

Communication interface:

Remote I/O (RIO) port, supporting multi-node communication

Two serial ports (RS-232C), used for file transfer and printing

Two DH-485 ports

Two RIO ports

Input/Output:

Twenty dedicated optically isolated discrete inputs

Discrete output of 8 photoelectric isolation open-circuit relays

Four isolated configurable analog outputs, control resolution 16-bit, 305 µV, output range ±10V DC or ± 150mA, maximum offset voltage ± 80mV (220Ω resistor)

Supports up to 8 Flex I/O modules and provides up to 128 discrete I/O points

Memory:

Non-volatile memory: Supports up to 2000 user-defined processes, 16-bit floating-point numbers, write-protected battery backup storage, and a battery life of 10 years

Environmental conditions:

Operating temperature: 0 to 60°C (32 to 140°F)

Storage temperature: -40 to 85°C (-40 to 185°F)

Humidity: 5-95% (no condensation)

Protection grade: It needs to be installed in NEMA Type 12/13, 4X (indoor), IP54 or IP65 cabinets

Seismic resistance: 15g impact, 2g vibration (up to 2000 Hz)

Firmware and software: Programmed using GML (Graphics Motion Control Language), RS-232C is used for file transfer

Status indicator lights: Green (Normal communication), red (Fault)

Other: The battery supports real-time data retention and has a lifespan of 10 years

Function

Motion control

Supports 4-axis motion control and is suitable for multi-axis servo applications.

Using the Intel i960 processor and the multitasking operating system (up to 10 tasks), it supports up to 2000 user-defined processes.

It provides electronic CAM function, supporting coordinated movement based on time or the position of another axis, and supports phase shift, automatic registration and automatic correction.

Correspondence:

The RIO port supports multi-node communication with controllers such as PLC-5 and ControlLogix, and is compatible with block transmission and discrete transmission.

The RS-232C port is used for file transfer and printing alarm/event logs.

The DH-485 port enhances network connectivity.

Input/Output extension:

Supports up to 8 Flex I/O modules and provides 128 discrete I/O points to enhance I/O flexibility.

Four configurable analog outputs, supporting ±10V DC or ± 150mA output, suitable for various control requirements.

Programming and Configuration

Programming with GML offers over 100 commands to customize complex motion control applications.

Support offline development and debugging to simplify application development.

Durability

The design is adapted to harsh industrial environments, featuring high seismic resistance and a wide temperature range.

Battery backup ensures data retention and is suitable for long-term operation.

Application scenarios

Manufacturing industry: Used for precision motion control, such as CNC machine tools, robot assembly lines and packaging equipment.

Automated production lines: Control multi-axis servo systems, such as in automotive manufacturing and electronic product assembly.

Process control: In industries such as chemical engineering and food processing, coordinating multi-axis movements to achieve precise operation.

Factory automation: Integrate into the factory network through RIO and Flex I/O modules to achieve multi-device collaboration.

Data recording: Record events and alarms through the RS-232C port, suitable for industries that require compliance recording (such as pharmaceuticals).

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]