1791-16BC Allen-Bradley Block I/O Module

Product parameters

Module type: Discrete I/O Block Module

Series: Allen-Bradley 1791 Block I/O Series

Input/output points:

Input: 16 DC inputs (divided into 2 groups, with 8 inputs in each group

Output: 16 DC outputs (divided into 2 groups, with 8 outputs in each group)

Working voltage:

Input/output voltage range: 10-30V DC

Nominal voltage: 24V DC

Input voltage in open state: 10-30V DC

Cut-off status input voltage: Up to 5V DC

Input current:

Minimum current in open state: 2.5mA (10V DC)

Maximum current in open state: 11 mA (30V DC)

Input impedance: 3.4k Ohms

Output current:

Maximum output current: 500 mA (vertically installed at 60°C) 1 A (installed vertically at 30°C); 250 mA (horizontal installation at 60°C); 500 mA (horizontal installation at 30°C)

Surge current: 3 A (lasting for 50 ms, repeating every 2 seconds)

Power supply:

Built-in power supply, voltage range: 19.2-30V DC

Current requirement: 600 mA

Power dissipation

Maximum power dissipation: 17.8 BTU/ hour

Isolation

Power supply to RIO: 500V AC

From I/O group to I/O group: 1250V AC

I/O group to logic: 1250V AC

Environmental conditions:

Operating temperature: 0 to 60°C (32 to 140°F)

Storage temperature: -40 to 85°C (-40 to 185°F)

Relative humidity: 5-95% (non-condensing)

Protection grade: IEC IP20 (needs to be installed in an appropriate protection cabinet)

Installation method: Supports horizontal or vertical installation. It can be installed using DIN rails or panels

Terminal type: Detachable screw terminal. The recommended cable is 14 AWG (2 mm²) twisted wire, with a maximum insulation thickness of 3/64 inches

Communication protocol: Supports Remote I/O (RIO) protocol

Baud rate: 57.6K, 115.2K or 230.4K

Maximum cable length: 10,000 feet at 57.6K; It is 5,000 feet at 115.2K. It is 2,500 feet at 230.4K

Recommended RIO cable: Belden 9463

Function

Input/output processing

It provides 16 24V DC input channels and supports the connection of discrete devices such as proximity switches, limit switches, selector switches, float switches and push-button switches.

It provides 16 24V DC output channels, which can drive actuators such as indicator lights, relay coils, buzzers, solenoid valves, etc.

The input and output are divided into two groups, with 8 channels in each group. There is electrical isolation between the groups to enhance the system's safety.

Built-in power supply and communication interface:

The module has an internal power supply (19.2-30V DC), and no external power fuse is required (the protection fuse is already included inside the module).

Supports the Remote I/O (RIO) protocol and is connected to the main controller in a Daisy chain topology via the Belden 9463 cable. Compatible with controllers such as Allen-Bradley's PLC-2, PLC-3, PLC-5, and SLC 500 (requiring a 1747-SN remote I/O scanner).

Configuration flexibility:

The switch components inside the module are used to set the I/O rack number, final status and final rack configuration, facilitating users to customize according to application requirements.

It can be monitored and controlled through the user interface of the PLC.

Fault Diagnosis:

It is equipped with status indicator lights to display the communication status and channel operation conditions, facilitating quick fault diagnosis.

Built-in hardware watchdog function to monitor the operating status of the microprocessor.

Convenience of wiring:

The detachable terminal block design simplifies wiring and module replacement, reducing maintenance time.

It is recommended that users add external fuses to the output channel as needed to enhance protection (the module output does not have built-in fuses).

Compact design

The module integrates rack, adapter, power supply and I/O functions, reducing system complexity and being suitable for distributed control applications with limited space.

Application scenarios

Machine control

It is used to monitor and control discrete signals in mechanical equipment, such as proximity switches to detect the position of parts, limit switches to monitor the travel of machinery, or push-button switches to trigger operations.

It is commonly found in packaging machines, conveyor belt systems, assembly lines and other equipment.

Process control

It is applied in process automation systems to monitor the status of level switches (such as float switches), valves or sensor signals.

It is suitable for industries such as chemical engineering, petroleum and natural gas, and water treatment.

Building Automation

It is used in building management systems to monitor the status of switches or sensors, such as status detection in access control systems and HVAC systems.

Distributed Control System (DCS)

As a remote I/O module, it communicates with PLC or SLC controllers via the RIO protocol and is suitable for scenarios in large factories or production lines that require decentralized control.

Supports Daisy chain topology, simplifies wiring, and is suitable for long-distance I/O expansion.

Highly compatible automated system

Compatible with a variety of Allen-Bradley controllers (such as PLC-2, PLC-3, PLC-5, SLC 500), it is particularly suitable for expanding the number of input/output points of existing automation systems.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]