1788-CN2DN Allen-Bradley Network Linking Device Communications Adapter

Product parameters

General parameters

Module Type: Linking Device from ControlNet to DeviceNet

Product Number: 1788-CN2DN (Series may be A or B)

Protection grade: IP20 (Open type, needs to be installed in a protective cabinet)

Operating temperature: 0°C to 60°C (32°F to 140°F)

Storage temperature: -40°C to 85°C (-40°F to 185°F)

Relative humidity: 5% to 95% (non-condensing)

Working impact: 30g (DIN rail or panel mounting, IEC 68-2-27)

Vibration resistance: 2 g (10-500 Hz, IEC 68-2-6)

ESD immunity: 6 kV (contact discharge), 8 kV (air discharge, in compliance with IEC 61000-4-2)

Temperature code: T4A (North America), T4 (IEC)

Certifications: ATEX, China CCC, UKCA, UL, C-UL, CE

Electrical parameters

Input power supply: 18-32V DC, nominal 24V DC (Class 2 or SELV)

Maximum input current: 400 mA @ 24V DC

Power consumption: Maximum 9.6W

Wire requirements:

Power connection: 0.25- 2.5mm ² (22-14 AWG), solid or stranded copper wire, insulation class ≥75°C (167°F), maximum insulation thickness 1.2mm (3/64 inches)

DeviceNet connection: 1485C-P1-Cxxx cable, 0.52mm ² (20 AWG)

ControlNet connection: RG6 coaxial cable

Connector

Two BNC coaxial ControlNet connectors

1 DeviceNet 10-pin linear connector (supports 5-pin or micro connectors, to be purchased separately)

One 5-pin Phoenix power connector

Communication parameters

ControlNet Protocol: Supports ControlNet networks and requires "Active Keeper" for network scheduling and clock synchronization

DeviceNet protocol: Supports data rates of 125K, 250K, and 500K bps (set via one rotary switch)

Node address: 4 DeviceNet node address switches (0-63)

Maximum number of connections: Supports up to 64 DeviceNet nodes

Compatibility

Supported controllers: PLC-5, SLC 500, CompactLogix, ControlLogix (For example, Logix5550 requires the 1756-CNB module)

Supported devices: DeviceNet adapters (such as POINT I/O, Flex I/O), Series 9000 Photoeye, 855T Stack Light, 1792D-VT0D Maxum Block, Bulletin 160 Drive, etc

Software requirements: RSLinx 2.10 or higher, RSLogix 5000 (Add-On Profile integration), RSNetWorx for ControlNet/DeviceNet

Function

Network bridging

As a bridge between the ControlNet and DeviceNet networks, it supports data exchange.

Allow ControlNet devices (such as PLC-5, ControlLogix controllers) to communicate with DeviceNet devices (such as I/O adapters, sensors).

High-performance communication

ControlNet offers highly deterministic and repeatable data transmission, making it suitable for time-critical I/O and interlocked data.

DeviceNet supports data rates of 125K, 250K and 500K bps, adapting to different network requirements.

Easy to configure

Automatically identify and configure devices through the Add-On Profile of the RSLogix 5000 to simplify integration.

The rotary switch sets the DeviceNet data rate, and the node address switch sets the network address.

Diagnosis and Monitoring

It provides multiple LED status indicator lights to monitor the network status of ControlNet/DeviceNet, I/O status and module health status.

Supports RSNetWorx for network diagnosis, but cannot directly display the DeviceNet status code (which needs to be viewed through the connected DeviceNet scanner).

High reliability

Supports DIN rail or panel installation, with an IP20 protection rating, suitable for industrial environments.

The 30g working impact and wide temperature range (0-60°C) ensure stability.

Flexible connection

Supports up to 16 DeviceNet devices, reducing the need for external power regulators.

Open 10-pin or 5-pin DeviceNet connectors are provided, compatible with various cable types.

Application scenarios

Manufacturing industry: Connect the PLC-5 or ControlLogix controller with the DeviceNet I/O module (such as POINT I/O) to achieve production line control.

Process control: In the chemical and food and beverage industries, connect HMI and DeviceNet devices (such as 855T Stack Light) to monitor process data.

Traditional system upgrade: Integrate the ControlNet network of the old PLC-5 system (including 1785-L40L) with DeviceNet devices to expand functions.

Distributed control: Connect the controller and remote DeviceNet devices through ControlNet, supporting distributed I/O.

Data acquisition: Collect sensor data from DeviceNet devices (such as Series 9000 Photoeye) and transfer it to the SCADA system of ControlNet.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]