1772-LP3 Allen Bradley Rockwell PLC-2 30 Processor Unit
1772-LP3 is a PLC-2/30 processor unit designed for use with the PLC-5 programmable logic controller from Rockwell Automation.
HS CODE : 8538909200
Product No :
1772-LP3 1772LP3Manufacture :
Allen BradleySize (cm) :
31 * 22 * 34Weight (kg) :
12Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
Processor UnitProduct parameters
Module type: PLC-2/30 Programmable Controller Processor Unit
Memory capacity: 256 words (word), based on CMOS read/write memory
I/O capacity: Up to 896 input/output points
Input voltage:
Nominal: 120/240 VAC
Range: 98-132 VAC (nominal 120 VAC) or 196-250 VAC (nominal 240 VAC)
Frequency: 50/60 Hz
Current demand:
At 120 VAC: 2 A
At 240 VAC: 1 A
Operating temperature: 0 to 60°C (32 to 140°F)
Storage temperature: -40 to 85°C (-40 to 185°F)
Relative humidity: 5% to 95% (no condensation)
Installation location:
Installed in 1771 series I/O racks (such as 1771-A1B, A2B, A3B, A4B)
It is usually used in combination with power modules (such as 1772-P1) and other I/O modules
Interface:
Compatible with Allen-Bradley Data Highway or other industrial standard networks
Support programming for industrial terminals (such as 1770-T3 or 1784-T50)
Programming method: Input the user program through the Ladder Diagram or function block display format
Mode selection: Equipped with a 4-position mode selection switch (located on the front of the processor), it supports modes such as running, programming, and testing
Indicator: Status indicator light, used for fault detection and operation status monitoring
Certification: Complies with UL, CSA and other standards (Specific certifications may vary by supplier)
Function
Program storage and execution
Equipped with CMOS read/write memory, it stores user program instructions, I/O device status and numerical data.
It supports ladder diagram and function block programming. Users can input programs through industrial terminals (such as 1770-T3 or 1784-T50). The ladder diagram symbols are similar to those of traditional relay control systems, which is convenient for operation.
I/O control
It supports up to 896 I/O points and is compatible with various I/O modules (such as digital input/output, analog modules), capable of controlling a wide range of devices, including solid-state devices, thumb wheel switches, solenoid valves, alarm indicators, motors or motor starters.
It provides I/O enforcement functions to facilitate debugging and troubleshooting.
Advanced computing functions:
It supports arithmetic operations (addition, subtraction, multiplication, division), timer, counter and data transmission functions, and is suitable for complex control logic.
Support the expansion of arithmetic functions and relay-type functions to enhance program flexibility.
Network communication
Compatible with Allen-Bradley Data Highway, supports communication with other PLCS or industrial equipment, and is convenient for integration into large-scale control systems.
Fault Diagnosis:
Equipped with status indicator lights to detect processor or system faults and simplify troubleshooting.
The 4-position mode selection switch enables users to switch between operation, programming or test modes, facilitating system configuration and maintenance.
System configuration:
It is used in conjunction with scanners, interface modules, input/output modules and power supply modules (such as 1772-P1) to form a complete PLC-2/30 system.
Support users to choose modular configuration to adapt to different application requirements.
Program protection: Through the jumper Settings of the 1772-LH interface module, the function of prohibiting program modification can be enabled to prevent unauthorized modification of user programs or data tables (address 4008 and above).
Application scenarios
Manufacturing plant
It is used for production line control, such as in automotive manufacturing, food processing or electronic assembly, to control conveyor belts, robotic arms, sensors and actuators.
Complex sequential control and logical operations are achieved through ladder diagram programming.
Process control
In the chemical, oil and gas or pharmaceutical industries, process equipment (such as pumps, valves, heaters) is monitored and controlled to handle variables such as temperature and pressure.
Supports timer and counter functions, suitable for batch processing or continuous process control.
Material handling: In warehousing or logistics systems, control automated handling equipment, conveyor belts or sorting systems to ensure efficient material flow.
Energy management: In power distribution or renewable energy systems, manage switchgear, relays or monitoring devices to support highly reliable control tasks.
Traditional equipment upgrade: Applicable to the upgrade or maintenance of old systems from the 1980s (such as ABAR vacuum furnaces), maintaining the operation of legacy equipment while supporting Data Highway network integration.
Complex control tasks: Utilizing extended arithmetic capabilities and I/O enforcement functions, it is suitable for scenarios that require complex logic or data processing, such as measurement, monitoring, or pollution control.
Advantage Products:
DANFOSS | VLT® AutomationDrive,Plus+1®,MCP | ||
KEYENCE | KV-800,KV-300,KP-3000,KP-7000,KJ,KV-Nano,HMI | ||
GE FANUC | PACSystems RX3i,90-30,90-70 | ||
SCHNEIDER | Modicon M340,Modicon M580,Modicon X80,Pioneer | ||
BENTLY NEVADA | 3500/94,3500/53,3500/22M,3500/42M,330180-90-00 | ||
HONEYWELL | Experion® PKS,ControlEdge™ ,HC900 | ||
ALLEN BRADLEY | CompactLogix,ControlLogix, MicroLogix,Flex I/O | ||
WESTINGHOUSE | Westinghouse Modbus,Westinghouse 9080,Westinghouse 8000,Westinghouse 1000 |
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L(Sales Manager)
Tina(Sales Specialist)
Ricardo(Sales Specialist)
Tel:+86 18359251915
Doris(Sales Specialist)
Tel:+86 13599531915
Conditions |
Original Brand New |
Approximate Lead Time |
3-5 days |
Warranty |
One Year |
Online Service |
24 / 7 |
Express Company |
DHL / FedEx / UPS / TNT etc. |
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies