1769-L33ER Allen Bradley Rockwell CompactLogix Controller

Product parameters

Model: 1769-L33ER

Series: CompactLogix 5370 L3

User memory: 2MB (User programs and data)

Non-volatile storage: Standard 1GB SD card (1784-SD1), supports up to 2GB SD card (1784-SD2)

I/O capacity:

Maximum local I/O modules: 16 1769 series modules

Maximum I/O module group: 3 (connected via appropriate expansion cables)

Communication port:

2 EtherNet ports (supporting Ethernet /IP, 10/100 Mbps, automatic negotiation, DLR device-level ring network function)

1 USB port (for programming, configuration and firmware update, up to 12 Mbps)

EtherNet nodes: Supports up to 32 EtherNet/IP nodes

Task support: Up to 32 periodic or continuous tasks, with each task supporting up to 100 programs

Power distance rating: The controller needs to be installed at a position no more than four modules away from the power module

Backplane current

5V DC: 500 mA

24V DC: Not applicable

Current consumption: 560 mA @ 5V DC (across 4 power modules)

Maximum power consumption: 4.5W

Power module: Compatible with 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4

Battery: No battery required (non-volatile storage using SD card)

Isolation voltage: Ethernet port to system: 30V (continuous), basic insulation, 60-second test

Operating temperature: 0 to 60°C (32 to 140°F)

Storage temperature: -40 to 85°C (-40 to 185°F)

Relative humidity: 5 to 95% (no condensation)

Operation impact: 20G for DIN rail installation and 30G for panel installation

Vibration: 5G @ 10-500 Hz, 0.030 inches peak-to-peak value

Shell type: Open type

Certification: UL, cUL, CE, C-Tick, in compliance with CISPR11 Group 1 emission grades

Programming software: RSLogix 5000 (Firmware version 20.11 or lower) or Studio 5000 Logix Designer (firmware version 21.00 or higher)

Wiring requirements: Use 90°C rated copper wire, solid wire 22-14 AWG, twisted wire 22-16 AWG

Function

Modular design: Supports up to 16 local I/O modules and 3 I/O module groups, suitable for small and medium-sized systems and easy to expand.

EtherNet communication: Dual Ethernet ports support EtherNet/IP protocol, with built-in switch function, supporting DLR (Device-level Ring Network), providing high reliability and redundancy, suitable for distributed control systems.

USB port: It is used for backup communication, main configuration and troubleshooting, and can also be used for firmware updates.

Non-volatile storage: Standard 1GB SD card (expandable to 2GB) for storing programs and data, supporting automatic loading after power failure.

Status indication: Equipped with LED indicator lights (RUN, FORCE, I/O, OK, DCH0, LINK1, LINK2, SD), facilitating fault diagnosis and status monitoring.

High performance: Supports 32 tasks (periodic or continuous), with a maximum of 100 programs per task, and supports complex control logic.

Programming support: Supports IEC 61131-3 standard programming languages (ladder diagram, structured text, function block diagram, sequential function diagram), configured through RSLogix 5000 or Studio 5000 software.

DeviceNet supports: It can install the 1769-SDN module and supports I/O module communication on the DeviceNet network.

Application scenarios

Material handling: Control equipment such as conveyor belts and automatic guided vehicles (AGVs).

HVAC control: Used for heating, ventilation and air conditioning control in building management systems.

Medium-sized process control: Applicable to process control of medium-sized production lines, such as pumps, valves or process equipment.

Assembly operation: Control the automated assembly line or robot workstation.

SCADA system: It is used for data acquisition and control tasks in distributed control systems.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]