1769-L16ER-BB1B Allen Bradley Rockwell CompactLogix Controller

Product parameters

Type: CompactLogix 5370 L1 Programmable Automation Controller (PAC)

Memory:

User memory: 384 KB

Non-volatile storage: 1 GB Secure Digital (SD) card (standard, Part number 1784-SD1), supporting up to 2 GB SD cards (1784-SD2)

Communication port:

2 EtherNet ports (RJ45, supporting Ethernet /IP, 10/100 Mbps, with DLR (Device-level Ring Network) function)

One USB 2.0 port (for programming, configuration and online editing, with a maximum cable length of 3 meters)

Supported protocols: EtherNet/IP, USB (for programming)

Ethernet performance

Node support: Up to 4 EtherNet/IP nodes

Network topology: Supports linear, star and DLR (Device-level Ring Network) topologies

Maximum number of connections: 256 CIP connections, 120 TCP connections

Data packet rate: 6000 packets per second (500 bytes per packet)

Embedded I/O

Input: 16 24 VDC Sinking (Sinking) digital inputs (10-30 VDC, nominal 24 VDC)

Output: 16 Sourcing digital outputs of 24 VDC (10-30 VDC, nominal 24 VDC, 0.5 A at each point, total module current 4 A)

Extended I/O: Supports up to 6 1734 POINT I/O modules

Task support:

Up to 32 controller tasks

Each task supports up to 100 programs

Power supply requirements:

Input voltage: 10-30 VDC (Nominal 24 VDC, non-isolated, Class 2 power supply)

Backplane current: 1 A @ 5 VDC

On-site power supply current: 3 A @ 24 VDC (total of embedded I/O and expansion modules)

Power dissipation: Up to 11.5W

Heat dissipation: Maximum 39.2 BTU/hr

Isolation voltage: 30 V (continuous), test withstand voltage 710 VDC for 60 seconds

Operating temperature: -20°C to 60°C (-4°F to 140°F)

Storage temperature: -40°C to 85°C (-40°F to 185°F)

Relative humidity: 5% to 95% (no condensation)

Vibration: 5 G @ 10-500 Hz (in compliance with IEC 60068-2-6)

Impact

Runtime: 30 G

Non-operating: 50 G (in compliance with IEC 60068-2-27)

Protection grade: IP20 (Open Type)

Installation method: DIN rail or panel installation (galvanized or yellow-chromium steel DIN rail is recommended)

Wiring method: Removable terminal block (RTB), applicable wire diameter 0.25- 2.5mm ² (14-22 AWG), temperature rating 75°C or higher, maximum insulation thickness 1.2mm

Certifications: C-TICK, CCC, CE, CUL, GOST, KC, MARINE, UL, Class I Division 2

ESD immunity: 6 kV contact discharge, 8 kV air discharge (in compliance with IEC 61000-4-2)

Conducted radio frequency immunity: 10 V/m, 200 Hz 50% pulse, 100% AM@900/1890 MHz (in compliance with IEC 61000-4-3)

Status indicator lights: RUN, I/O, OK, FORCE, SD, NS, LINK1, LINK2

Programming language: Supports IEC 61131-3 standard language (ladder diagram, function block diagram, structured text, sequential function diagram)

Function

Compact controller: 1769-L16ER-BB1B is a CompactLogix 5370 L1 series controller, specifically designed for small and distributed control applications, integrating embedded I/O and Ethernet communication.

Ethernet support: Dual Ethernet ports support DLR (Device-level Ring Network), providing high availability network redundancy. It is suitable for linear, star and ring topologies and supports communication with HMI, I/O and other devices.

Embedded I/O: Equipped with 16 built-in 24VDC submerged inputs and 16 24VDC source outputs, it reduces the need for external I/O modules and is suitable for compact applications.

Expansion capability: Expand up to 6 modules through POINT I/O (1734 series) to enhance I/O capacity, suitable for small to medium-sized systems.

Programming and Configuration: Programming is carried out using Studio 5000 Logix Designer software, which supports ladder diagrams, function block diagrams, structured text and sequential function diagrams.

Diagnostic function: Real-time feedback on operation, I/O, network and power status is provided through status indicator lights (RUN, I/O, OK, FORCE, SD, NS, LINK1, LINK2).

Storage support: Standard equipped with a 1GB SD card for storing programs, firmware and user data, supporting hot plugging and program backup.

High performance: Supports 32 tasks and 256 CIP connections, suitable for multi-tasking and complex network applications.

Installation flexibility: Compact design, supporting DIN rail or panel installation, suitable for space-constrained environments.

Application scenarios

Manufacturing industry: It is used for conveyor belts and assembly line control in automotive manufacturing and food and beverage production lines.

Material handling: Control conveyor belts, stackers and other equipment, supporting high-precision positioning and network redundancy.

Packaging machinery: Achieve rapid and reliable control in sealing, labeling and sorting equipment.

Process control: It is used in small-scale distributed I/O systems in the chemical and pharmaceutical industries.

OEM application: Provide compact and economical controller solutions for equipment manufacturers, integrating embedded I/O and Ethernet functions.

Building automation: Used for HVAC systems or small facility management, supporting Ethernet communication and remote monitoring.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]