1756-L63 Allen-Bradley ControlLogix Logix5563 Controller

Product parameters

Processor type: Logix5563 processor, Series A or B.

Memory:

User memory: 8 MB (for data and logical storage).

I/O memory: 478 KB.

Non-volatile storage: Supports 128 MB CompactFlash card (1784-CF128, optional).

I/O capacity:

Maximum digital I/O: 128,000.

Maximum analog I/O: 4,000 (Input 4,000 / output 2,000).

Maximum total I/O: 128,000.

Communication interface:

It is equipped with 1 built-in RS-232 serial port, supporting DF1 (full/half duplex), ASCII, DH-485, and Modbus (via logic).

Supported communication modules: EtherNet/IP, ControlNet, DeviceNet, Data Highway Plus, Remote I/O, SynchLink.

Maximum number of controller connections: 250.

Power supply parameters:

Backplane current: 1.2 A @ 5.1 V DC, 14 mresia @ 24 V DC.

Power consumption: 3.5W

Heat dissipation: 11.9 BTU/hr.

Isolation voltage:

30 V continuous (RS-232 to system), test voltage 720 V DC for 60 seconds, basic insulation type.

Environmental requirements:

Operating temperature: 0°C to 60°C (32°F to 140°F).

Storage temperature: -40°C to 85°C.

Relative humidity: 5% to 95% (non-condensing).

Vibration: 2 g @ 10-500 Hz.

Operating impact: 30 g, non-operating impact: 50 g.

Battery

Supports 1756-BA2 (Series B) or 1756-BA1 (Series A).

Program execution:

Supports 32 tasks, with a maximum of 100 programs for each task.

Support all event triggering (event tasks).

Rack compatibility

Compatible with ControlLogix racks: 1756-A4, A7, A10, A13, A17.

It can be installed in any slot of the frame.

Power supply compatibility

Standard power supplies: 1756-PA50, PA72, PA75, PB50, PB72, PB75.

Redundant power supplies: 1756-PA75R, PB75R, PSCA2.

Certification:

Complies with UL, CE, CSA and FM, and is applicable to Class I Div.2 hazardous environments (Group A/B/C/D, temperature code T4).

Function

High-performance automated control

The Logix5563 processor supports complex logic and has a scanning time as low as 0.08ms, making it suitable for high-speed and multi-tasking applications.

Supports 32 tasks, with a maximum of 100 programs per task, flexibly handling multi-threaded control.

Flexible communication

It is equipped with an RS-232 serial port and supports protocols such as DF1, Modbus, and ASCII.

The communication module supports industrial networks such as EtherNet/IP, ControlNet, and DeviceNet, and is compatible with third-party devices.

It supports up to 250 controller connections and is suitable for distributed control systems.

Controller redundancy: Supports controller redundancy (additional redundancy module configuration is required) to enhance system reliability (not applicable to motion control).

Integrated motion control: Supports SERCOS (Serial Real-time Communication System), analog encoder input, LDT/SSI input, and EtherNet/IP motion control.

Modular design

It can be installed in any slot of the ControlLogix rack and supports multi-controller configuration.

Supports CompactFlash card (128 MB) for non-volatile storage to prevent data loss in case of power failure.

Programming and Diagnosis

Programming, configuration and monitoring are carried out using the Studio 5000 Logix Designer software.

Provide status indicator lights (for operation, fault, communication, etc.) to facilitate real-time diagnosis.

Environmental adaptability

The design is suitable for harsh industrial environments (high vibration, high temperature, humidity), and supports open rack installation.

Application scenarios

Manufacturing industry

Control automated production lines (such as automotive manufacturing and electronic assembly), and manage robots, conveyor belts, sensors and actuators.

Suitable for complex systems that require a high number of I/O points (up to 128,000 digital I/O and 4,000 analog I/O).

Petroleum and Natural Gas

It is used in oil refineries or pipeline systems to control pumps, valves and flow meters, and supports distributed control (via EtherNet/IP or ControlNet).

Adapt to dangerous environments (certified by Class I Div.2).

Food and Beverages

Manage packaging, filling and processing equipment to ensure high precision and production efficiency.

Support multitasking and optimize production line coordination.

Water treatment and wastewater treatment

Control pumping stations, filters and chemical dosing systems to handle a large number of I/O points and complex logics.

Provide redundant configuration to ensure high system availability.

Electricity and Energy

It is used in distribution systems or power plants to control transformers, circuit breakers and monitoring equipment.

Supports motion control and is suitable for wind power or hydropower equipment.

Pharmaceuticals

Control the mixing, packaging and quality inspection equipment to meet the requirements of high precision and compliance (but not applicable to scenarios that require safety certification).

Typical applications:

Distributed control system: Multi-device collaboration is achieved through EtherNet/IP or ControlNet.

Medium and large-scale process control: Handling complex logic and a large number of I/O points.

Motion control: such as applications of servo drives or encoders.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]