PLC ENGINEERING

1756-DNB Allen Bradley Rockwell DeviceNet Ser E/B/C D Communication Interface Module

Home

Allen Bradley

1756-DNB Allen Bradley Rockwell DeviceNet Ser E/B/C D Communication Interface Module

1756-DNB Allen Bradley Rockwell DeviceNet Ser E/B/C D Communication Interface Module

1756-DNB is a DeviceNet communication module.

HS CODE : 8538909200

  • Product No :

    1756-DNB 1756DNB
  • Manufacture :

    Allen Bradley
  • Size (cm) :

    3.8 * 15.2 * 14
  • Weight (kg) :

    0.37
  • Origin :

    USA
  • Warranty :

    12 Month
  • Lead Time :

    Ready Stock
  • Description :

    Interface Module

Product Parameters

Model: 1756-DNB

Type: ControlLogix DeviceNet Scanner Module

Communication Protocol: DeviceNet (based on CAN technology)

Port: 1 DeviceNet port (5-pin linear plug, Phoenix Combicon connector)

Communication Rates: 125 Kbps, 250 Kbps, or 500 Kbps

Node Capacity: Supports up to 63 DeviceNet nodes

Connection Capacity:

Up to 32 simultaneous DeviceNet connections

Supports polled, cyclic, change-of-state, and explicit messaging

Current Draw:

400 mA @ 5.1V DC

1.4 mA @ 24V DC

Power Dissipation: 2.0 W

Thermal Dissipation: 7.0 BTU/hr

Isolation Voltage: 50V (continuous), basic insulation type, DeviceNet to backplane, tested at 500V AC for 60 s

Cable Type: DeviceNet-approved cables (e.g., Belden 3084A or 3082A for thick cable, 3085A for thin cable)

Mounting: Any slot in a ControlLogix chassis (e.g., 1756-A4, A7, A10, A13, A17)

Power Supply Compatibility:

Standard: 1756-PA72/C, 1756-PA75/B, 1756-PB72/C, 1756-PB75/B

Redundant: 1756-PA75R, 1756-PB75R, 1756-PSCA2

Operating Temperature: 0°C to +60°C (32°F to +140°F)

Storage Temperature: -40°C to +85°C (-40°F to +185°F)

Relative Humidity: 5–95% non-condensing

Certifications: CE, CSA, CUL, KC, RCM, UL

Terminal Block Torque: 0.5–0.6 N-m (4.4–5.3 lb-in)

Functions

DeviceNet Scanner: Acts as a scanner to manage communication with up to 63 DeviceNet devices, collecting and sending data to the ControlLogix controller.

Data Exchange: Supports polled, cyclic, and change-of-state I/O messaging for real-time control, as well as explicit messaging for configuration and diagnostics.

I/O Control: Manages digital, analog, and specialty DeviceNet devices (e.g., sensors, actuators, drives) without requiring additional message instructions.

Diagnostics: Provides status LEDs and diagnostic data for monitoring network health, device status, and fault detection.

Multi-Device Integration: Connects ControlLogix systems to DeviceNet devices like motor starters, drives, or sensors, enabling seamless integration.

Removal/Insertion Under Power (RIUP): Supports installation/removal with chassis power on, provided safety precautions are followed to avoid electrical arcing in non-hazardous areas.

Legacy and Modern Bridging: Interfaces modern ControlLogix systems with DeviceNet devices, supporting hybrid or legacy system integration.

Application Scenarios

Manufacturing Automation: Connects ControlLogix controllers to DeviceNet devices like sensors, actuators, or drives in automotive or electronics assembly lines for real-time control.

Process Control: Used in industries like food and beverage, chemical, or water treatment to manage distributed I/O devices over DeviceNet.

Material Handling: Supports conveyor systems, automated guided vehicles (AGVs), or packaging equipment by enabling communication with DeviceNet-enabled motor starters or sensors.

Legacy System Upgrades: Bridges modern ControlLogix systems with existing DeviceNet networks, facilitating phased upgrades without replacing infrastructure.

Motion Control: Integrates with DeviceNet-compatible drives (e.g., PowerFlex) for coordinated motion in robotics or CNC applications.

General Automation: Suitable for applications needing reliable, low-cost communication with DeviceNet devices in standard industrial environments (0°C to +60°C).

Advantage Products:

DANFOSS VLT® AutomationDrive,Plus+1®,MCP
KEYENCE KV-800,KV-300,KP-3000,KP-7000,KJ,KV-Nano,HMI
GE FANUC PACSystems RX3i,90-30,90-70
SCHNEIDER Modicon M340,Modicon M580,Modicon X80,Pioneer
BENTLY NEVADA 3500/94,3500/53,3500/22M,3500/42M,330180-90-00
HONEYWELL Experion® PKS,ControlEdge™ ,HC900
ALLEN BRADLEY CompactLogix,ControlLogix, MicroLogix,Flex I/O
WESTINGHOUSE Westinghouse Modbus,Westinghouse 9080,Westinghouse 8000,Westinghouse 1000

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       


Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     


Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]

Conditions

Original Brand New

Approximate Lead Time

3-5 days

Warranty

One Year

Online Service

24 / 7

Express Company

DHL / FedEx / UPS / TNT etc.

MOQ

1 Piece

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

20D-DL2-CKE1
20D-DL2-CKE1 Allen Bradley Powerflex 700S Control Upgrade Kit
20D-DL2-CKE1 is an Allen-Bradley PowerFlex 700S Phase II Drive Control Upgrade Kit used for machine control and system monitoring. HS CODE : 8538909200
More +
22B-D6P0N104
22B-D6P0N104 Allen-Bradley PowerFlex 40 Variable Frequency Drive (VFD)
22B-D6P0N104 is a variable frequency drive (VFD) manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1203-GD1
1203-GD1 Allen-Bradley Remote I/O Communication Module
1203-GD1 is a Remote I/O communications module manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1336F-BRF75-AA-EN DRIVE
1336F-BRF75-AA-EN Allen-Bradley 1336 Plus II Adjustable Frequency AC Drive
1336F-BRF75-AA-EN is an adjustable frequency AC drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1336F-BRF100-AA-EN DRIVE
1336F-BRF100-AA-EN Allen-Bradley 1336 Plus II Adjustable Frequency AC Drive
1336F-BRF100-AA-EN is an adjustable frequency AC drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1408-EM3A-ENT MODULE
1408-EM3A-ENT Allen-Bradley PowerMonitor 1000 Energy Monitor EM3
1408-EM3A-ENT is an energy management meter with Ethernet/IP communications manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1398-DDM-005-DN DRIVE
1398-DDM-005-DN Allen Bradley Ultra Servo Drive
1398-DDM-005-DN is a digital servo drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1398-DDM-005 DRIVE
1398-DDM-005 Allen-Bradley 1398 ULTRA Servo Drives
1398-DDM-005 is a digital servo drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Copyright 2025 @ TZ TECH Co., LTD. .All Rights Reserved Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Sitemap | Blog | XML | Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact

YOUR COOKIE SETTINGS

In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.

Accept and continue Decline cookies