1734-SSI Allen Bradley Rockwell CompactLogix 5370 Absolute Encoder Interface

Product parameters

Type: Synchronous Serial Interface (SSI) Absolute encoder module, POINT I/O series

Number of channels: 1 SSI channel

Input voltage: 10-28.8 VDC (nominal 24 VDC)

PointBus current: Maximum 110 mA @ 5 VDC

Power dissipation: Maximum 0.94W

Heat dissipation: Maximum 3.21 BTU/hr

Isolation voltage: 50 V (continuous), test withstand voltage: 1250 VDC for 60 seconds

SSI data rates: Supported at 125 kHz, 250 kHz, 500 kHz, 1 MHz, and 2 MHz

SSI data format: Supports Most significant bit (MSB) aligned data format, compatible with Gray code and binary code

Physical interface: RS422

Supported encoder types: Absolute encoders that support the standard SSI protocol, including linear, rotary and optical distance measurement devices

Data length: 8-31 bits

Operating temperature: -20°C to 55°C (-4°F to 131°F)

Storage temperature: -40°C to 85°C (-40°F to 185°F)

Relative humidity: 5% to 95% (no condensation)

Vibration: 5 G @ 10-500 Hz (in compliance with IEC 60068-2-6)

Working shock: 30 G, non-working shock: 50 G (in compliance with IEC 60068-2-27)

Protection grade: IP20 (Open Type)

Installation method: DIN rail

Wiring method: 8-pin removable terminal block (RTB), supporting screw-type or spring-type terminals, applicable wire diameter 0.25- 2.5mm ² (14-22 AWG), temperature rating 75°C or higher, maximum insulation thickness 1.2mm

Certifications: C-TICK, CCC, CE, CUL, GOST, KC, MARINE, UL, IECEx Scheme, Registro Italiano Navale

ESD immunity: 6 kV contact discharge, 8 kV air discharge (in compliance with IEC 61000-4-2)

Conducted radio frequency immunity: 10 V/m, 200 Hz 50% pulse, 100% AM@900/1890 MHz (in compliance with IEC 61000-4-3)

Key control position: 2

Supported adapters: 1734-ACNR (ControlNet), 1734-ADN (DeviceNet), 1734-AENT (EtherNet/IP), 1734-APB (Profibus)

Function

SSI protocol support: Collect absolute encoder data that supports the standard SSI protocol through a single SSI channel, suitable for linear, rotary and optical distance measurement devices, and supports high-frequency input signals (125 kHz to 2 MHz).

Data processing: Supports data lengths ranging from 8 to 31 bits, is compatible with Gray code to binary conversion, aligns data formats with MSB, and provides high-precision position feedback.

Operation mode: Supports operation, data type, data rate, Gray code to binary conversion and standardized mode, flexibly adapting to various application requirements.

Modular design: Integrated with the POINT I/O system, supports DeviceNet, ControlNet, EtherNet/IP and Profibus networks, and is compatible with CompactLogix and ControlLogix controllers.

Hot-swappable (RIUP) : Supports module replacement while the system is running, reducing downtime.

Diagnostic function: Real-time diagnosis is provided through module status, network status, operation status, up and down status, comparison status and I1 indicator light, facilitating fault detection.

Configuration and programming: Configuration is carried out through RSLogix 5000 or Studio 5000 Logix Designer software, and parameter setting is supported by RSNetWorx for DeviceNet software.

DIN rail installation: Use the 1734-TB or 1734-TBS wiring base, key control position 2, compact installation, suitable for space-limited scenarios.

Application scenarios

Manufacturing industry: It is used in conveyor belts, assembly lines, and packaging equipment in factory automation to achieve precise control of servo motors.

Material handling: Control the positioning of equipment such as conveyor belts and stackers to ensure high-precision movement.

Packaging machinery: Provides absolute position feedback in sealing, labeling and sorting equipment to ensure rapid and accurate operation.

Robot system: Provides high-precision position data for robots and supports complex motion trajectories.

Process control: It is used for precise linear or rotational position monitoring in the chemical and pharmaceutical industries.

Automated test equipment: Integrated into the test platform for high-speed data acquisition of optical or rotary encoders.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]