1734-OX2 Allen Bradley Rockwell CompactLogix 5370 Relay I/O Module

Product parameters

Output channel number: 2

Off-state leakage current: Maximum 1.2 mA @ 240 VAC (through discharge resistor and suppression circuit)

Initial contact resistance: up to 30 mΩ

Output signal delay

From on to off: Up to 26 ms (from the effective output of the off signal to the relay power-off)

From off to on: Up to 10 ms (from the effective output of the on signal to the relay being powered on)

PointBus current: Maximum 80 mA @ 5 VDC

Power dissipation: Maximum 0.5W

Heat dissipation: Maximum 1.7 BTU/hr

Isolation voltage:

Between contacts: Test withstand voltage of 2550 VDC for 60 seconds

Customer load to logic: Test withstand voltage of 2550 VDC for 60 seconds

Relay life: 100,000 times (2 A load, minute switching cycle)

Operating temperature: -20°C to 55°C (-4°F to 131°F)

Storage temperature: -40°C to 85°C (-40°F to 185°F)

Relative humidity: 5% to 95% (no condensation)

Vibration: 5 G @ 10-500 Hz (in compliance with IEC 60068-2-6)

Working shock: 30 G, non-working shock: 50 G (in compliance with IEC 60068-2-27)

Protection grade: IP20 (Open Type)

Installation method: DIN rail

Wiring method: Screw-type terminal, applicable wire diameter 0.25- 2.5mm ² (14-22 AWG), temperature grade 85°C or higher, maximum insulation thickness 1.2mm

Certifications: C-TICK, CCC, CE, CUL, GOST, KC, MARINE, UL, IECEx Scheme, Registro Italiano Navale

ESD immunity: 6 kV contact discharge, 8 kV air discharge (in compliance with IEC 61000-4-2)

Conducted radio frequency immunity: 10 V/m, 200 Hz 50% pulse, 100% AM@900/1890 MHz (in compliance with IEC 61000-4-3)

Key control position: 7

Function

Relay output: It provides 2 Form C (normally open/normally closed, N.O./N.C.) relay outputs, supports multiple voltages, is suitable for mixed-voltage applications, and does not require power supply from the internal power bus of the system.

High flexibility: Supports resistive and inductive loads, suitable for various actuators (such as relays, solenoid valves, indicator lights), compatible with AC and DC loads. The Form C relay provides normally open and normally closed contacts to enhance control flexibility.

Electronic protection: Reduce the off-state leakage current (up to 1.2 mA @ 240 VAC) through discharge resistors and suppression circuits to protect the module and load.

Status indication: Equipped with 1 green/red network status indicator light, 1 green/red module status indicator light and 2 yellow output status indicator lights, facilitating diagnosis and monitoring.

Modular design: Supports POINT I/O systems, is compatible with multiple communication adapters, realizes a distributed I/O architecture, and is compatible with CompactLogix and ControlLogix controllers.

Hot-swappable (RIUP) : Supports module replacement while the system is running, reducing downtime.

Sysmac Studio compatibility: Configuration and programming can be carried out through RSLogix 5000 or Studio 5000 Logix Designer software to simplify debugging and maintenance.

DIN rail installation: Supports 1734-TB, 1734-TBS, 1734-TOP or 1734-TOPS wiring bases, with 7 key control positions. It is easy to install and suitable for space-limited scenarios.

Application scenarios

Manufacturing industry: Controls relays, solenoid valves, indicator lights and other actuators, suitable for automotive manufacturing and food and beverage production lines.

Material handling: Drive conveyor belts, stackers and other equipment to meet the requirements of mixed voltage and dual-state (N.O./N.C.) control.

Packaging machinery: It is used to control sealing, labeling and sorting equipment to ensure rapid operation.

Process control: Controlling pumps, valves and other equipment in a distributed I/O system, suitable for the chemical and pharmaceutical industries.

Robot system: It provides reliable relay output signals for the robot's end effector and supports multiple control logics.

Building automation: Controlling actuators in HVAC systems, such as dampers or valves, suitable for scenarios that require normally open/normally closed switching.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]