1734-OE4C Allen Bradley Rockwell CompactLogix 5370 Analog I/O Module

Product parameters

Number of output channels: 4 (single-ended, non-isolated, current output

Output current range: 0-20 mA or 4-20 mA (configurable, default 4-20 mA

Resolution: 16 bits (within the range of 0-21 mA, approximately 0.641 μA/cnt)

Absolute accuracy: 0.4% full scale @ 25°C (up to 0.1% after calibration)

Temperature drift: less than 50 ppm/°C

Step response: approximately 40 μs at 63% full scale

Conversion rate: Approximately 16 μs

Load resistance: 0-750 Ω

PointBus current: Maximum 75 mA @ 5 VDC

External DC power supply: 24 VDC (nominal), range of 10-28.8 VDC, current 110 mA @ 24 VDC (including 20 mA output)

Power dissipation: Maximum 1.86 W @ 750 Ω load, 2.15 W @ 0 Ω load

Heat dissipation: Maximum 6.34 BTU/ hr@750 Ω load, 7.33 BTU/ hr@0 Ω load

Isolation voltage: 50 V (continuous), test withstand voltage 1500 VAC for 60 seconds (from the on-site side to the system)

Operating temperature: -20°C to 55°C

Storage temperature: -40°C to 85°C

Relative humidity: 5% to 95% (no condensation)

Vibration: 5 G @ 10-500 Hz

Work shock: 30 G, non-work shock: 50 G

Protection grade: IP20 (Open Type)

Installation method: DIN rail (Galvanized or yellow-chromium steel DIN rail is recommended. Ensure grounding.)

Wiring method: Screw type or spring type terminal, applicable wire diameter 0.25- 2.5mm ² (14-22 AWG), temperature grade 75°C or higher, maximum insulation thickness 1.2mm

Certification: C-TICK, CCC, CE, CUL, GOST, KC, MARINE, UL, IECEx Scheme

ESD immunity: 6 kV contact discharge, 8 kV air discharge

Conducted radio frequency immunity: 10 Vrms, 1 kHz sine wave, 80% AM, 80-150 MHz

Key control position: 4

Function

High-density analog current output: It provides 4 single-ended, non-isolated current output channels, supporting 0-20 mA or 4-20 mA signals, for driving analog actuators. The output density is twice as high as that of 1734-OE2C.

High-precision control: 16-bit resolution and 0.4% full-scale accuracy (0.1% after calibration) ensure precise analog signal output, suitable for closed-loop control.

Fast response: Step response time 40 μs, conversion rate 16 μs, suitable for dynamic control applications.

Fault diagnosis: The channel indicator light flashes red when there is an open circuit or the field power supply is lost, supporting open circuit detection and facilitating fault investigation.

Modular design Supports POINT I/O system, is compatible with various communication adapters (such as DeviceNet, Profibus, ControlNet, EtherNet/IP), realizes distributed I/O architecture, and is compatible with CompactLogix and ControlLogix controllers.

Hot-swappable (RIUP) : Supports module replacement while the system is running, reducing downtime.

Sysmac Studio compatibility: Configuration and programming can be carried out through RSLogix 5000 or Studio 5000 Logix Designer software to simplify debugging and maintenance.

Status indication: Equipped with module status, network status and 4 channel status indicator lights (red/yellow), facilitating the monitoring of module and channel status.

Application scenarios

Process control: Drive control valves, frequency converters (VFDS), dampers, louvers and other analog actuators, suitable for the chemical, petroleum and pharmaceutical industries.

Packaging machinery: Precisely controlled analog signal output, used for sealing, labeling, and sorting equipment.

Material handling: Adjust the speed of the conveyor belt or position the equipment to ensure smooth operation.

Data recording: Transmit analog signals to data loggers, panel tables, accumulators, signal converters or isolators for monitoring and recording.

Robot system: Provides precise analog control signals for the end effector of the robot.

Building automation: Controlling analog actuators in HVAC systems, such as valves or dampers.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]