PLC ENGINEERING

1734-OB8 Allen Bradley Rockwell CompactLogix 5370 Source I/O Module

Home

Allen Bradley

1734-OB8 Allen Bradley Rockwell CompactLogix 5370 Source I/O Module

1734-OB8 Allen Bradley Rockwell CompactLogix 5370 Source I/O Module

1734-OB8 is a POINT I/O Digital 24VDC Sourcing Output Module that features eight output channels.

HS CODE : 8538909200

  • Product No :

    1734-OB8 1734OB8
  • Manufacture :

    Allen Bradley
  • Size (cm) :

    5.6 * 7.6 * 1.2
  • Weight (kg) :

    0.04
  • Origin :

    USA
  • Warranty :

    12 Month
  • Lead Time :

    Ready Stock
  • Description :

    I/O Module

Product parameters

Output channel number: 8 (non-isolated, current source type, 1 group)

Output voltage range: 10-28.8 VDC

Nominal output voltage: 24 VDC

Maximum output current: 1.0A per channel, and the total current of the module does not exceed 3.0A

Surge current: 2 A, lasting for 10 ms, and can repeat every 3 seconds

Open-state voltage drop: Maximum 0.2 VDC

Open-state current: Minimum 1.0 mA per channel

Leakage current in off state: maximum 0.5 mA

Off-state voltage: Maximum 28.8 VDC

Output signal delay: on to off/off to on, maximum 0.1 ms

PointBus current: Maximum 75 mA @ 5 VDC

External DC power supply current: 32 mA

Power dissipation: Maximum 2.0W @ 28.8VDC

Heat dissipation: Maximum 6.8 BTU/hr @ 28.8 VDC

Isolation voltage: 50 V (continuous), test withstand voltage 2500 VDC for 60 seconds (from the field side to the system)

Operating temperature: -20°C to 55°C

Storage temperature: -40°C to 85°C

Relative humidity: 5% to 95% (no condensation)

Vibration: 5 G @ 10-500 Hz

Work shock: 30 G, non-work shock: 50 G

Protection grade: IP20

Installation method: DIN rail

Wiring method: Screw-type terminal, applicable wire diameter 2.5mm ² to 0.34mm ² (14-22 AWG), temperature grade 75°C or higher, maximum insulation thickness 1.2mm

Certifications: C-TICK, CCC, CE, CUL, GOST, KC, MARINE, UL

ESD immunity: 6 kV contact discharge, 8 kV air discharge

Conducted radio frequency immunity: 10 Vrms, 1 kHz sine wave, 80% AM, 80-150 MHz

Function

High-density output: It provides 8 current source type digital outputs. The output density is the highest in the POINT I/O series, suitable for high-density control requirements. The compact design saves installation space.

Fast response: The output signal delay is only 0.1ms, making it suitable for applications that require rapid switching.

Status indication: Equipped with 8 yellow output status indicator lights and 2 green/red module/network status indicator lights, it is convenient for diagnosis and monitoring.

Modular design: Supports integration with the POINT I/O system and can be used in conjunction with various communication adapters to achieve a distributed I/O architecture. The series C module supports programming with RSLogix 5000 or Studio 5000 Logix Designer.

Hot-swappable (RIUP) : Supports module replacement while the system is running, reducing downtime.

Compatibility: It can be used in conjunction with controllers such as GuardLogix and Compact GuardLogix, and is suitable for standard automation applications.

DIN rail installation: Supports 1734-TB or 1734-TBS wiring bases, easy to install, suitable for space-constrained scenarios.

Application scenarios

Manufacturing industry: Controls relays, solenoid valves, indicator lights and other actuators, suitable for automotive manufacturing and food and beverage production lines.

Material handling: Drive conveyor belts, stackers and other equipment to meet the requirements of high-speed switching.

Packaging machinery: It is used to control sealing, labeling and sorting equipment to ensure precise and rapid operation.

Process control: Controlling pumps, valves and other equipment in a distributed I/O system, suitable for the chemical and pharmaceutical industries.

Robot system: Provides reliable digital output signals for the end effector of the robot.

Building automation: Controlling actuators in HVAC systems, such as dampers or valves.

Advantage Products:

DANFOSS VLT® AutomationDrive,Plus+1®,MCP
KEYENCE KV-800,KV-300,KP-3000,KP-7000,KJ,KV-Nano,HMI
GE FANUC PACSystems RX3i,90-30,90-70
SCHNEIDER Modicon M340,Modicon M580,Modicon X80,Pioneer
BENTLY NEVADA 3500/94,3500/53,3500/22M,3500/42M,330180-90-00
HONEYWELL Experion® PKS,ControlEdge™ ,HC900
ALLEN BRADLEY CompactLogix,ControlLogix, MicroLogix,Flex I/O
WESTINGHOUSE Westinghouse Modbus,Westinghouse 9080,Westinghouse 8000,Westinghouse 1000

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       


Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     


Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]

Conditions

Original Brand New

Approximate Lead Time

3-5 days

Warranty

One Year

Online Service

24 / 7

Express Company

DHL / FedEx / UPS / TNT etc.

MOQ

1 Piece

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

20D-DL2-CKE1
20D-DL2-CKE1 Allen Bradley Powerflex 700S Control Upgrade Kit
20D-DL2-CKE1 is an Allen-Bradley PowerFlex 700S Phase II Drive Control Upgrade Kit used for machine control and system monitoring. HS CODE : 8538909200
More +
22B-D6P0N104
22B-D6P0N104 Allen-Bradley PowerFlex 40 Variable Frequency Drive (VFD)
22B-D6P0N104 is a variable frequency drive (VFD) manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1203-GD1
1203-GD1 Allen-Bradley Remote I/O Communication Module
1203-GD1 is a Remote I/O communications module manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1336F-BRF75-AA-EN DRIVE
1336F-BRF75-AA-EN Allen-Bradley 1336 Plus II Adjustable Frequency AC Drive
1336F-BRF75-AA-EN is an adjustable frequency AC drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1336F-BRF100-AA-EN DRIVE
1336F-BRF100-AA-EN Allen-Bradley 1336 Plus II Adjustable Frequency AC Drive
1336F-BRF100-AA-EN is an adjustable frequency AC drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1408-EM3A-ENT MODULE
1408-EM3A-ENT Allen-Bradley PowerMonitor 1000 Energy Monitor EM3
1408-EM3A-ENT is an energy management meter with Ethernet/IP communications manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1398-DDM-005-DN DRIVE
1398-DDM-005-DN Allen Bradley Ultra Servo Drive
1398-DDM-005-DN is a digital servo drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
1398-DDM-005 DRIVE
1398-DDM-005 Allen-Bradley 1398 ULTRA Servo Drives
1398-DDM-005 is a digital servo drive manufactured by Allen-Bradley. HS CODE : 8538909200
More +
Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Copyright 2025 @ TZ TECH Co., LTD. .All Rights Reserved Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Sitemap | Blog | XML | Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact

YOUR COOKIE SETTINGS

In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.

Accept and continue Decline cookies