1734-OA2 Allen Bradley Rockwell CompactLogix 5370 I/O Module

Product parameters

Module type: POINT I/O Digital AC Output Module

Number of output channels: 2 non-isolated, Sourcing output channels

Output voltage:

Nominal output voltage: 120/220V AC

Output voltage range: 74-264V AC, 47-63 Hz

Output current:

Maximum current per channel: 0.75A

Maximum current of each module: 1.5A

Minimum current per channel: 10 mA

Surge current: 16 A, lasting for 100 ms, and can repeat every 3 seconds

Conduction voltage drop: 1.0V @ 0.75 A

Shutdown leakage current: Maximum 2.7 mA @ 264V AC

Power supply:

Maximum POINTBus current: 75 mA @ 5V DC

No external DC power supply is required

Power consumption:

Maximum power dissipation: 0.8W @ 264V AC

Maximum heat dissipation: 2.7 BTU/hr @ 264V AC

Isolation voltage: 240V (continuous), test voltage is 2500V DC, lasting for 60 seconds (from site to system)

Output delay time:

Conduction: Up to 1/2 cycle

Shutdown: Up to 1/2 cycle

Installation method: DIN rail installation (It is recommended to use galvanized yellow chromium steel rail)

Wiring method: Detachable terminal block (RTB), supporting 0.25- 2.5mm ² (22-14 AWG) solid or stranded copper wire, rated temperature 100°C (212°F), maximum insulation thickness 1.2mm

Terminal screw torque: 0.8 N·m (7 lb·in)

Operating temperature range: -20°C to 55°C (-4°F to 131°F), with a linear derating of 13% when the temperature exceeds 55°C

Storage temperature range: -40°C to 85°C (-40°F to 185°F)

Protection grade: Open type (no enclosure, IP20)

Compatible terminal bases: 1734-TB, 1734-TBS, 1734-TOP, 1734-TOPS

Key switch position: 8

Supported networks: ControlNet, DeviceNet, EtherNet/IP and other open networks

Certification standards: C-TICK, CE, CUL, GOST, KC, MARINE, UL

Relative humidity: 5-95% (non-condensing)

Vibration: 5 g @ 10-500 Hz during operation

Impact: 30 g during operation, 50 g during non-operation

Function

Digital AC output processing

It provides two non-isolated, source-type output channels to control 74-264V AC loads, such as relays, contactors, indicator lights or other AC devices.

Supports nominal 120/220V AC voltage and is compatible with various industrial power supply standards.

Compact design: As the AC output module with the fewest channels in the POINT I/O series, it is suitable for low-density output requirements and optimizes space utilization.

Modular design

Compatible with POINT I/O communication adapters and supporting distributed I/O architectures.

Detachable terminal blocks (RTB) simplify wiring, installation and maintenance.

Status monitoring

Equipped with indicator lights for module status, network status and status of each output channel, it is convenient for real-time monitoring and fault diagnosis:

Module status: No power (off), normal operation (green constantly on), requires configuration (green flashing), recoverable fault (red flashing), non-recoverable fault (red constantly on).

Network status: Offline (off), online no connection (green flashing), online connected (green constantly on), communication failure (red/green alternating flashing).

Output status: Output activated (yellow constantly on), not activated (off).

Fast response: The output delay time is up to 1/2 cycle, suitable for control applications that require rapid switching.

Special functions:

Supports the Autobaud function to simplify network configuration.

Support Sequential Auto Addressing to improve installation efficiency.

Low power consumption and high isolation

The maximum power dissipation is 0.8W, suitable for energy-saving systems.

240V continuous isolation ensures the safe separation of on-site signals from the system side.

Application scenarios

Industrial automation: It is used in PLC or PAC systems to control AC loads such as relays, contactors, solenoid valves, and indicator lights, and is suitable for factory production line control.

Manufacturing industry: In industries such as automotive manufacturing, food and beverage, and packaging machinery, drive AC equipment, such as motor starters or lighting systems.

Facility management: In building management systems or factory facilities, control high-voltage AC equipment such as HVAC systems, pumps or fans.

Distributed I/O system: In large factories, combined with POINT I/O communication adapters, it reduces wiring costs and enhances system scalability.

Low-density output control: Suitable for scenarios that only require a small number of AC output channels, such as small equipment or subsystem control.

Space-constrained environments: The compact design is suitable for installation on small control cabinets or DIN rails close to on-site equipment.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]