1203-SM1 Allen Bradley Rockwell SLC 500 Communication Module

Product parameters

Model: 1203-SM1

Type: SLC 500 SCANport Communication Module

Communication protocol: SCANport

Number of channels: 3 independent channels (CH1, CH2, CH3), supporting SCANport devices

Data transmission rate: 125 kbps (SCANport standard rate)

Power supply requirements:

Power supply voltage: 5V DC (80mA), 12V DC (300mA), powered by the SLC 500 backplane

Heat dissipation: approximately 22W at most

Environmental requirements:

Operating temperature: 0°C to 60°C (32°F to 140°F)

Storage temperature: -40°C to 85°C

Relative humidity: 5% to 95% (no condensation)

Avoid using in environments with corrosive or volatile gases, vapors or dust

Protection grade: IP00 (Open type, needs to be installed in the control cabinet)

Installation method: Insert into the SLC 500 rack and occupy 1 slot

ECCN classification: EAR99

Function

SCANport Communication: It provides direct digital communication between the SLC 500 controller and SCANport devices, supporting logical commands, status, reference values and data link transmission.

Multi-channel support: 3 independent channels, capable of simultaneously connecting up to 3 SCANport devices, supporting flexible network configuration.

Data exchange: Communicate with the processor through the SLC 500 backplane, transmit control and monitoring data, and support real-time driver control.

Diagnostic function: The LED indicator light on the front panel displays the module status, communication status and error messages, facilitating fault detection.

Configuration tool: Use the RSLogix 500 software for configuration, and set the communication parameters in combination with RSLinx or RSNetWorx for DeviceNet.

Compatibility: Seamless integration with SLC 500 series processors (such as 1747-L532), supporting local or remote I/O expansion.

Application scenarios

Industrial automation: It is used for production line control, such as packaging machines and conveying systems, and is integrated with SCANport equipment to achieve coordinated control of multiple devices.

Motion control: In the motor drive system, it is connected to the frequency converter or servo driver through SCANport to provide precise speed and torque control.

Distributed control: As part of the SLC 500 system, it connects to remote SCANport devices and is suitable for factory automation layouts.

Manufacturing equipment: such as injection molding machines and stamping machines, multi-channel support is utilized to achieve synchronous control of multiple drivers.

Process control: In HVAC, pump or fan systems, optimize speed control and energy efficiency through SCANport devices.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]