YASKAWA SGDV-5R5A15A AC SERVO MOTOR SIGMA-V SERIES

Product parameters

Model: SGDV-5R5A15A

Series: Sigma-V SGDV series

Rated output power: 0.75 kW (750 W)

Input power supply:

Three-phase AC: 200-230 VAC, 50/60 Hz

Voltage range: 170-253 VAC (nominal 200 VAC, +10%/-15%)

Input current: Approximately 4.7 A

Output:

Rated output current: 5.5A

Peak output current: 16.9A

Output voltage: 0-230 VAC

Output frequency: 0-1000 Hz

Control mode: MECHATROLINK-II Communication Command Control (Applicable to Rotating Motors) Supports torque, speed, position and synchronous phase control Support full closed-loop control

Environmental conditions:

Operating environment temperature: 0°C to +55°C

Storage temperature: -20°C to +85°C

Environmental humidity: 20% to 80% (no condensation)

Protection grade: IP10 (Suitable for clean and controlled industrial environments)

Communication interface: MECHATROLINK-II Communication (High-speed Network Control) RS-422 communication capability (for debugging or parameter setting)

Encoder feedback Support 20-bit high-resolution serial encoders (absolute or incremental) Compatible with 17-bit or higher resolution encoders

Frequency response: 1 kHz (High response performance)

Speed control range: 1:5000

Vibration level: V15

Insulation resistance: DC 500 V, 10 MΩ or above

Insulation withstand voltage: AC 1500 V, 1 minute (200 V class)

Digital input/output Seven digital inputs (common signals, such as P-OT, N-OT, /SI0-/SI6) Three digital outputs (alarm, positioning completion, consistent speed, etc., such as ALM, /COIN, /V-CMP)

Analog input: 1 torque control input (-3... +3 VDC, adjustable to -10... +10 VDC One speed control input (-6...) +6 VDC, adjustable to -10... +10 VDC

Security and Certification Comply with UL 508C, EN 50178, EN 55011 (Group A Class 1), EN 61800-3, and EN 61800-5-1 EN 954 category 3, Stop Category 0, IEC 61508 SIL2

Cooling method: Natural cooling

Function

High-precision motion control Supports 20-bit high-resolution encoders to achieve precise position, speed and torque control. The speed control range is 1:5000, which is suitable for high dynamic response requirements.

MECHATROLINK-II Communication: Supports high-speed network control, achieving torque, speed, position and synchronous phase control, suitable for multi-axis synchronous applications. Short communication cycle, fast response time, and improved system efficiency.

Automatic tuning Built-in Tuning-less function, stable operation can be achieved without manual adjustment. Advanced Autotuning rapidly optimizes mechanical performance and shortens the debugging time.

Vibration suppression Enhanced vibration suppression function reduces mechanical resonance and enhances system stability. Supports FT001 (vibration suppression upgrade) and FT003 (pressure feedback) functions to shorten positioning time.

Multi-functional control Supports torque, speed and position control modes, and enables flexible application through parameter switching. Built-in positioning function, supporting JOG operation (JOG), origin search and fixed-point output.

Protection mechanism: It includes overcurrent, overvoltage and short-circuit protection to ensure the safety of the driver and motor. Alarm history records facilitate fault diagnosis.

Easy to set up and integrate The setup wizard and wiring confirmation functions are provided through the SigmaWin+ project tool to simplify the installation. Parameters can be directly input through the driver body, reducing the complexity of wiring.

Energy conservation and efficiency Full-wave rectification and IGBt-based PWM control drive sinusoidal wave output to reduce energy consumption. Support external regenerative resistor connection to optimize energy management.

Compatibility Seamlessly integrated with Yaskawa Sigma-5 series servo motors (such as SGMAV, SGMGV). Support multiple feedback devices to enhance system flexibility.

Application scenarios

Robots: Joint drive for industrial robots and collaborative robots, requiring rapid response and multi-axis synchronization.

CNC machine tools: Drive high-precision milling, turning and grinding equipment, providing stable speed and position control.

Semiconductor manufacturing equipment: used for high-precision applications such as wafer processing and chip packaging.

Electronic component packaging equipment: Drives high-speed surface mount technology (SMT) machines or packaging machines to meet dynamic load requirements.

Packaging equipment: Applied to high-speed packaging machines, sealing machines and labeling machines, providing precise motion control.

Material handling system: It is used for conveyor belts, automatic sorting systems and stackers to ensure efficient and stable operation.

Textile machinery: Drives high-speed looms or spinning machines, reduces vibration and enhances stability.

Liquid crystal manufacturing equipment: used for precise positioning and synchronous control to enhance production efficiency.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                

E-mail:doris.g@tztechautomation.com