YASKAWA SGDV-330A11A AC SERVO MOTOR SIGMA-V SERIES

Product parameters

Model: SGDV-330A11A

Series: Sigma-V SGDV series

Rated output power: 5 kW (5000 W)

Input power supply:

Three-phase AC: 200-230 VAC, 50/60 Hz

Voltage range: 170-253 VAC (nominal 200 VAC, +10%/-15%)

Input current: approximately 25 A

Output:

Rated output current: 32.9A

Peak output current: approximately 78 A

Output voltage: 0-230 VAC

Output frequency: 0-400 Hz

Control mode: MECHATROLINK-II Communication Command Control (Applicable to Rotating Motors) Supports torque, speed, position and synchronous phase control Support full closed-loop control

Environmental conditions:

Operating environment temperature: 0°C to +55°C

Storage temperature: -20°C to +85°C

Environmental humidity: 20% to 80% (no condensation)

Protection grade: IP10 (Suitable for clean and controlled industrial environments)

Communication interface: MECHATROLINK-II communication (maximum transmission speed 10 Mbps, communication cycle 250 µs to 4 ms, supporting up to 30 stations) Communication capability of RS-422

Encoder feedback Support 20-bit high-resolution serial encoders (absolute or incremental) Compatible with 17-bit or higher resolution encoders

Frequency response: 1.6 kHz (industry-leading high response performance)

Speed control range: 1:5000

Vibration level: V15

Insulation resistance: DC 500 V, 10 MΩ or above

Insulation withstand voltage: AC 1500 V, 1 minute (200 V class)

Digital input/output Seven digital inputs (common signals, such as P-OT, N-OT, /SI0-/SI6) Three digital outputs (alarm, positioning completion, consistent speed, etc., such as ALM, /COIN, /V-CMP)

Security and Certification Comply with UL 508C, EN 50178, EN 55011 (Group A Class 1), EN 61800-3, and EN 61800-5-1 EN 954 category 3, Stop Category 0, IEC 61508 SIL2

Cooling method: Natural cooling

Others: Support external regenerative resistor connection to optimize energy management Built-in positioning function, supporting point operation and origin search

Function

High-precision motion control Supports 20-bit high-resolution encoders to achieve precise position, speed and torque control. The speed control range is 1:5000, and the frequency response is 1.6 kHz, which is suitable for high dynamic response requirements.

MECHATROLINK-II Communication: High-speed network control (10 Mbps, communication cycle 250 µs to 4 ms), supporting up to 30 stations, and achieving multi-axis synchronization. It provides torque, speed, position and high-precision synchronous phase control, suitable for complex motion trajectories.

Automatic tuning Real-time adaptive load control, automatic adjustment of servo gain, and simplified debugging. Advanced Autotuning can rapidly optimize mechanical performance and quickly set the optimal parameters even for the first contact.

Vibration suppression Enhanced vibration suppression function reduces mechanical resonance and enhances system stability. Supports FT001 (vibration suppression upgrade) and FT003 (pressure feedback) to shorten the positioning time.

Multi-functional control Supports torque, speed and position control modes, and enables flexible application through parameter switching. Built-in positioning function, supporting JOG operation (JOG), origin search and fixed-point output.

Protection mechanism: Including _flexible user system_, supporting single-phase 200V, three-phase 200V and absolute encoders, in line with international standards. Alarm history records facilitate fault diagnosis.

Easy to set up and integrate The setup wizard and wiring confirmation functions are provided through the SigmaWin+ project tool to simplify the installation. Parameters can be directly input through the driver body, reducing the complexity of wiring.

Energy conservation and efficiency Full-wave rectification and IGBt-based PWM control drive sinusoidal wave output to reduce energy consumption. Support external regenerative resistor connection to optimize energy management.

Compatibility Seamlessly integrated with Yaskawa Sigma-5 series servo motors (such as SGMGV, SGMSV). Support multiple feedback devices to enhance system flexibility.

Application scenarios

Robots: The joints that drive industrial robots and collaborative robots, requiring high-precision multi-axis synchronization.

CNC machine tools: Used for high-precision milling, turning and grinding, providing stable speed and position control.

Semiconductor manufacturing equipment: Applied in high-precision scenarios such as wafer processing and chip packaging.

Electronic component packaging equipment: Drives high-speed surface mount technology (SMT) machines or packaging machines to meet dynamic load requirements.

Packaging equipment: Used for high-speed packaging machines, sealing machines and labeling machines, providing precise motion control.

Material handling system: Drives heavy-duty conveyor belts, automatic sorting systems and stackers to ensure efficient and stable operation.

Textile machinery: Drives high-speed looms or spinning machines, reduces vibration and enhances stability.

Liquid crystal manufacturing equipment: used for precise positioning and synchronous control to enhance production efficiency.

Machine tools and general machinery: Applied to high-load and high-precision mechanical equipment, such as stamping machines or injection molding machines.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                

E-mail:doris.g@tztechautomation.com