OMRON R88M-1AM20030T-O AC SERVO MOTOR 1S SERIES
The R88M-1AM20030T-O is a 200 W AC servo motor from OMRON’s 1S series, equipped with an absolute encoder for precise positioning and an oil seal for enhanced environmental protection.
HS CODE : 8538909200
Product No :
OMRON R88M-1AM20030T-OManufacture :
OMRONSize (cm) :
6*6*13Weight (kg) :
1.5Origin :
JAPANWarranty :
12 MonthLead Time :
Ready DRIVEDescription :
AC SERVO MOTORProduct Parameters
Model: R88M-1AM20030T-O
Power: 200 W
Rated Voltage: 230 VAC (single-phase)
Rated Speed: 3000 RPM
Rated Torque: 0.637 Nm
Peak Torque: Approximately 2.2 Nm
Encoder Type: Absolute encoder (typically 23-bit resolution)
Brake: None
Oil Seal: Included (enhances dust and liquid resistance)
Shaft Type: Straight shaft without key or tap
Protective Rating: IP65 or higher (with oil seal, confirm via official specs)
Compatible Drive: R88D-1SAN02H-ECT (EtherCAT type, 200 W, 230 VAC)
Shaft Features: Straight, without key or tap
Functions
High-Precision Positioning: Absolute encoder ensures accurate motion control for complex tasks.
Oil Seal Protection: Enhances resistance to dust, oil, and moisture, suitable for harsh environments.
Plain Shaft: Straight shaft without key or tap for flexible coupling in specific applications.
EtherCAT Communication: Supports high-speed, real-time control with 1S series drives.
High Reliability: Conforms to TUV EC certification, supports motion safety features.
Simplified Setup: 1S series design reduces installation and commissioning time.
Application Scenarios
Packaging Machinery: Drives high-speed, precise motion in equipment like conveyors or filling machines, with oil seal protecting against contaminants.
Automated Production Lines: Used in electronics or automotive assembly for dynamic motion control in dusty or oily settings.
Material Handling: Powers conveyors or lightweight AGVs in environments with dust or oil exposure.
Food/Pharma Processing: Oil seal supports use in environments with light exposure to liquids or cleaning agents.
General Automation: Suitable for applications with simple shaft coupling needs and no requirement for position holding during power-off.
Advantage Products:
| DANFOSS | VLT® AutomationDrive,Plus+1®,MCP | ||
| KEYENCE | KV-800,KV-300,KP-3000,KP-7000,KJ,KV-Nano,HMI | ||
| GE FANUC | PACSystems RX3i,90-30,90-70 | ||
| SCHNEIDER | Modicon M340,Modicon M580,Modicon X80,Pioneer | ||
| BENTLY NEVADA | 3500/94,3500/53,3500/22M,3500/42M,330180-90-00 | ||
| HONEYWELL | Experion® PKS,ControlEdge™ ,HC900 | ||
| ALLEN BRADLEY | CompactLogix,ControlLogix, MicroLogix,Flex I/O | ||
| WESTINGHOUSE | Westinghouse Modbus,Westinghouse 9080,Westinghouse 8000,Westinghouse 1000 | ||
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L(Sales Manager)
Tina(Sales Specialist)
Ricardo(Sales Specialist)
Tel:+86 18359251915
Doris(Sales Specialist)
Tel:+86 13599531915
Something You Might Need：
| B&R | HONEYWELL | OMRON | GE FANUC |
| X20AO2632 | CC-KREB40 | R88M-W2K030T-BS2 | IC695ALG106 |
| X20AO4622 | CC-KREB50 | R88M-W2K030T-S2 | IC695ALG306 |
| X20AO4632 | CC-KREBR5 | R88M-W3K030H-BS2 | IC695ALG312 |
| X20AO4632-1 | CC-MCAR01 | R88M-W3K030H-S2 | IC695ALG412 |
| X20AO4635 | CC-MCARW1 | R88M-W3K030T-BS2 |
IC695ALG508 |
| X20AI1744 | CC-MCC003 | R88M-W3K030T-S2 | IC695ALG626 |
| X20AI1744-10 | CC-MDUN12 | R88M-WP10030H | IC695ALG628 |
| X20AI1744-3 | CC-MDUR18 | R88M-WP10030H-B | IC695ALG704 |
| X20A12222 | CC-PAIH01 | R88M-WP10030H-BS1 | IC695ALG728 |
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
24 / 7 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
