OMRON R88D-1SAN30H-ECT WATERPROOF AC SERVO DRIVER 1S SERIES

Product parameters

Model: R88D-1SAN30H-ECT

Power supply voltage: 3-phase 200 VAC (Range: 170-252 VAC)

Rated output power: 3 kW

Rated output current: 16.9A

Control methods: Position control, speed control, torque control

Communication interface: EtherCAT (built-in, 100 Mbps, supporting distributed clock DC)

Encoder support: 23-bit high-resolution absolute multi-turn encoder (16-bit, 65,536 turns, no battery backup required)

Input signal: Digital input (such as origin sensors, limit switches, etc.), analog input is supported

Output signal: Digital output (such as servo ready, alarm, etc.)

Safety function: Built-in STO (Safe Torque Off), and the safe input signal complies with EN ISO 13849-1 (Cat.3 PLe), EN 61508 (SIL3), EN 62061 (SIL3), and EN 61800-5-2 (STO) Support STO via EtherCAT Communication (FSoE), in compliance with EN ISO 13849-1 (Cat.3 PLd), EN 61508 (SIL2), and EN 62061 (SIL2)

Environmental conditions:

Operating temperature: 0 to 55°C (0 to 45°C when installed side by side, with a spacing of less than 10 mm)

Storage temperature: -20 to 65°C

Humidity: 20% to 90% (no condensation)

Protection grade: IP20

Insulation performance: Complies with the IEC Class 2 enhanced insulation standard and passes the dielectric test of 1200V AC (2 seconds) or 1697V DC (2 seconds)

Compatible motors: Omron 1S series rotary servo motors (such as R88M-1AL3K030T, 3 kW, 3000 rpm, 9.55 Nm) and linear servo motors

Others: Supports external regenerative resistors for energy recovery of high-inertia loads It complies with EU directives (EMC, Machinery Directive), UL/cUL standards, South Korean radio Regulations (KC), Australian EMC (RCM), etc

Function

High-performance motion control Supports position, speed and torque control, with a fast response time, suitable for high dynamic applications. The 23-bit high-resolution encoder (65,536-turn absolute multi-turn) ensures precise positioning without the need for a reset sequence, thereby increasing the machine's operating time. The optimization algorithm reduces vibration, enhances machine stability and production efficiency.

EtherCAT communication It is equipped with an EtherCAT interface and supports high-speed, real-time communication (100 Mbps). Supports distributed clock (DC) function to ensure multi-axis synchronous control (with high synchronization accuracy). It can be seamlessly integrated with Omron NJ/NX controllers or other EtherCAT master stations.

Safety function: Built-in STO (Safe Torque Off), motor power-off is achieved through hardware or EtherCAT (FSoE), which complies with international safety standards. Support the integration of external security devices, reduce the number of security components, and simplify the design of security systems. The security certifications include EN ISO 13849-1 (PLe/PLd), EN 61508 (SIL3/SIL2), EN 62061 (SIL3/SIL2), and EN 61800-5-2 (STO).

Convenient installation and debugging: Modular wiring design, including servo drive side connectors (except for encoder connectors), simplifies wiring. Supports Omron Sysmac Studio software (version 1.27 or higher) for parameter configuration, debugging and monitoring, and integrates fault diagnosis functions. Provide the Motor Sizing Tool to optimize the design of the servo system.

Protection function: Multiple protection mechanisms such as overcurrent, overvoltage, overheating, encoder errors, and regenerative circuit errors ensure the safe operation of the equipment. Support external regenerative resistors to handle energy recovery for high-inertia loads.

Flexible compatibility Compatible with various servo motors of Omron 1S series (such as R88M-1AL3K030T, 3 kW, 3000 rpm, 9.55 Nm). It can be integrated with controllers of other brands via EtherCAT.

Maintenance and Diagnosis Battery-free encoder design reduces maintenance requirements. Integrate fault diagnosis and predictive maintenance functions, and reduce downtime through real-time monitoring by Sysmac Studio.

Application scenarios

Packaging machinery It is used in high-speed packaging machines, sealing machines, labeling machines, etc., precisely controlling multi-axis movements (such as conveyor belts, cutting knives, mechanical arms), and improving production efficiency. Typical applications: Controlling the tension of packaging film and synchronizing the cutting position.

Robots and Automated Assembly Drive joint motors in collaborative robots or automated assembly lines to achieve complex trajectory control. The STO security function ensures the safe interaction between operators and equipment, making it suitable for human-machine collaboration scenarios.

CNC machine tool It is used in CNC machining centers, lathes or milling machines to control the spindle or feed axis and achieve high-precision processing. EtherCAT communication supports multi-axis synchronization, enhancing processing consistency. Printing equipment Control the rollers or paper feeding mechanism of the printing press to ensure synchronization and precision in high-speed printing. High dynamic response ADAPTS to the working conditions of frequent starts and stops. Semiconductor manufacturing It is used for wafer handling and chip packaging equipment, meeting the high-precision requirements in cleanroom environments. The security function supports strict security compliance.

Logistics and Material Handling Drive automated sorting systems, AGVs (Automated Guided Vehicles) or stackers to achieve efficient material flow. Compatible with linear motors and suitable for linear motion control.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]