HUAWEI CR5D00E8NB7S INTEGRATED LINE PROCESSING BOARD CM

Component code :03050JGK

Model :CR5D00E8NB7S

Single board category: Fixed board

Silk screen printing

LPUI-1T2A-CM

16x50/8x100GBase-QSFP28

Typical power consumption [W]: 464.27W

Typical heat dissipation value [BTU/hour]:1506.29 BTU/hour

Long-term operating environment temperature [°C]:0°C to 45°C

Short-term operating environment temperature [°C]:-5°C to +55°C

Basic function: Supports 800G line-speed forwarding.

Reliability and availability: Supports hot plugging.

Restrictions and Instructions:

Even ports (0/0, 0/2, 0/4, 0/6, 1/0, 1/2, 1/4, 1/6) can operate in 4*10GE hash /40GE/50GE/100GE mode, with a default of 50GE. They can be switched to 50GE/100GE mode through the command line port-speed. Switch to the 40GE/4*10GE hash mode through the command line port split. Odd-numbered ports (0/1, 0/3, 0/5, 0/7, 1/1, 1/3, 1/5, 1/7) can only operate in the 50GE mode.

2. If an even port operates in 4*10GE hash /40GE/100GE mode, the adjacent next odd 50GE port will not work. For example, if port 0 operates in 4*10GE hash /40GE/100GE mode, then port 1 cannot work. If port 0 operates in 50GE mode, Port 1 can also operate in 50GE mode. By analogy, ports 2 and 3, 4 and 5, and 6 and 7 have similar constraints.

3. Four 10GE ports scattered from the same QSFP+ port must operate simultaneously in 10GE WAN or 10GE LAN mode and do not support the coexistence of 10GE WAN and 10GE LAN. The 10GE WAN interface only supports the master clock mode. The default transmission rate of this single-board interface is 50G. When the transmission rate of the supported optical module interface used in conjunction does not match the default rate, for example, when using a 40G optical module, the port split enables the hash interface function to be executed.

4. In different modes of 100GE/50GE/40GE/10GE, optical modules of different rates need to be used in combination.

When this single board is used in conjunction with the 02312NCX optical module or the 02312MLF optical module, the long-term operating temperature of the optical module is 0°C to 45°C.

6. Ports 0/0-0/7 and 1/0-1/7 support FlexE features.

7, on the front panel port according to the following groups: 0/0, 0/1} {, {.two survivors, 0/3}, {} 0/4, 0/5, 0/6, 0/7} {, {} 1/0, 1/1, 1/2, 1/3 {}, {1/4, 1/5}, {} 1/6, 1/7

FlexE ports of the same rate within the same group can be bundled through configuration. For example, every two 50G ports can be bound into a group through FlexE, and the maximum rate of FlexE service ports within this group can be configured to 100Gbps.

Whether hashing is supported: Yes

To enable the hash interface, the command "port split" needs to be executed to complete the hash configuration.

Whether port rate adaptation is supported: Yes

To enable the adaptive mode, the command "switch-mode manual" needs to be executed to complete the adaptive configuration.

Does it support FlexE? Yes

(0,1) Physical ports can join the same Group, and the range of port-id is 8-15 and 1000-3000. The number of FlexE Clients supported for creation is 8.

(2,3) Physical ports can join the same Group, and the range of port-id is 16-23 and 1000-3000. Support the creation of 8 FlexE Clients.

(4,5) Physical ports can join the same Group, and the port-id range is 24-31, 1000-3000. The number of FlexE Clients supported for creation is 8.

(6,7) The physical ports can join the same Group, and the port-id range is 32-39 and 1000-3000. The number of FlexE Clients supported for creation is 8.

Does it support MACsec? Yes

Does it support the use of RTU? Yes

The default controlled port is 100M. If you want to use the bandwidth of other ports, you need to load the RTU.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]