BENTLY NEVADA 991-01-XX-01-CN PROXIMITY SENSORS
The Bently Nevada 991-01-XX-01-CN is a system of proximity sensors specifically designed to monitor rotating machinery.
HS CODE : 8538909200
Product No :
BENTLY NEVADA 991-01-XX-01-CNManufacture :
BENTLY NEVADASize (cm) :
12*9*2Weight (kg) :
0.2Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
PROXIMITY SENSORSProduct parameters
Measurement range: Typically 0-100 mils (0-2.54 mm), which can be adjusted according to application requirements. The linear range is 0.25-1.65 mm (10-65 mils).
Accuracy: ±0.5% of full scale.
Output type: Standard 4-20mA analog output, output impedance 10 kΩ, calibration load 10 mΩ.
Power supply: Working voltage is 18-30 VDC, power consumption is 5 watts.
Temperature range: Operating temperature is 0°C to + 70°C (+32°F to + 158°F), storage temperature is -40 °C to + 85°C.
Protection grade: IP65 (dust and water spray resistant) or IP67.
Function
Non-contact measurement: Non-contact proximity probes are used to measure the displacement of the target, ensuring reliable and maintenance-free operation.
High-precision measurement: It can accurately measure thrust, featuring excellent accuracy and repeatability.
Signal conditioning: Adjust the signal from the probe to an appropriate engineering unit proportional to the axial position of the shaft and output it to the control system as an industry-standard signal of 4-20mA.
Self-diagnosis: Built-in diagnostic function, which can continuously monitor its own performance and help identify potential problems with the sensor itself.
Strong anti-interference ability: The power-on suppression circuit eliminates signal errors caused by line voltage transients, and the abnormal/signal failure circuit can prevent high output or false alarms due to proximity probe faults or loose connections.
Application scenarios
Centrifugal compressor: Monitor the wear of thrust bearings and detect unbalanced conditions.
Pump: Track the alignment of the shaft and identify cavitation phenomena.
Turbine: Assess the wear of thrust bearings and detect imbalance issues.
Electric motor: Assess bearing wear and detect misalignment.
Advantage Products:
| DANFOSS | VLT® AutomationDrive,Plus+1®,MCP | ||
| KEYENCE | KV-800,KV-300,KP-3000,KP-7000,KJ,KV-Nano,HMI | ||
| GE FANUC | PACSystems RX3i,90-30,90-70 | ||
| SCHNEIDER | Modicon M340,Modicon M580,Modicon X80,Pioneer | ||
| BENTLY NEVADA | 3500/94,3500/53,3500/22M,3500/42M,330180-90-00 | ||
| HONEYWELL | Experion® PKS,ControlEdge™ ,HC900 | ||
| ALLEN BRADLEY | CompactLogix,ControlLogix, MicroLogix,Flex I/O | ||
| WESTINGHOUSE | Westinghouse Modbus,Westinghouse 9080,Westinghouse 8000,Westinghouse 1000 | ||
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Something You Might Need：
| EMERSON | MITSUBISHI | Bently Nevada | WESTINGHOUSE |
| KJ2004X1-BA1 | Q13UDEHCPU | 102044-00-18-15-02 | 1C31227G01 |
| KJ2005X1-BK1 | Q03UDCPU | 102044-00-18-50-02-00 | 1C31232G01 |
| KJ2005X1-SQ1 | Q04UDEHCPU | 106765-16 | 1C31233G01 |
| KJ2006X1-BK2 | Q26UDVCPU | 109549-01 | 1C31234G01 |
| KJ2201X1-BA1 | Q02UCPU | 125094-02 | 1X00781H01L |
| KJ3102X1-BA1 | Q26UDEHCPU | 125388-01 | 5X00062G01 |
| KJ3201X1-BA1 | Q00UJCPU | 128093-00-10-05-02-CN | 5X00063G01 |
| KJ3201X1-BA2 | Q06UDHCPU | 130118-0010-02 | 5X00226G01 |
| KJ3203X1-BK1 | Q26UDHCPU | 131150-01 128277-01C | 5X00226G03 |
| KJ3204X1-BA1 | Q04UDHCPU | 131178-01 | 5X00226G04 |
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
24 / 7 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
