PLC ENGINEERING

BENTLY NEVADA 330101-00-08-10-02-00 3300 XL 8MM PROXIMITY PROBES

Home

Bently Nevada

BENTLY NEVADA 330101-00-08-10-02-00 3300 XL 8MM PROXIMITY PROBES

BENTLY NEVADA 330101-00-08-10-02-00 3300 XL 8MM PROXIMITY PROBES

The Bently Nevada 330101-00-08-10-02-00 is part of the 3300 XL series and is specifically designed to monitor the vibration and displacement of rotating machinery. 

HS CODE : 8538909200

  • Product No :

    BENTLY NEVADA 330101-00-08-10-02-00
  • Manufacture :

    BENTLY NEVADA
  • Size (cm) :

    50
  • Weight (kg) :

    0.2
  • Origin :

    USA
  • Warranty :

    12 Month
  • Lead Time :

    Ready Stock
  • Description :

    PROXIMITY PROBES

Product parameters

Core specifications: 32-channel digital input channels (common ground architecture), supports TMR (Triple Redundancy) fault-tolerant design, compatible with TRICONEX TS3000/TS4000 systems

Voltage and signal type: Nominal input voltage 24VDC (wet contact), compatible with a wide voltage input range of 15-30VDC; Supports dry contact/wet contact signal access, and the input logic is configurable

Signal characteristics: Input delay ≤8ms (adjustable for filtering), input impedance ≥30kΩ (without baseplate) /3kΩ (with baseplate), surge resistance voltage ±2kV

Operating temperature: -20 °C to +60°C

Storage temperature: -40 °C to +85°C; Humidity: 5%-95% RH (no condensation), IP20 protection (modular level)

Certification and Standards: Complies with IEC 61508 SIL 3 safety level and has passed international safety certifications such as UL 1998, CE, IECEx, ATEX, etc

Interface and Communication: Supports TRICONEX dedicated backplane bus, data transmission rate ≥10Mbps, hot-swaddable design

Function

High-reliability signal acquisition: 32 channels independently collect on-site digital signals (such as switch status, alarm contacts, equipment start-stop feedback, etc.), and through signal isolation, filtering and anti-shake processing, resist electromagnetic interference (EMI) in industrial environments to ensure signal accuracy.

Triple redundancy fault tolerance: It adopts the TMR triple redundancy architecture, with three independent input channels processing signals in parallel. It supports 2oo3 (two out of three) or 3oo3 (three out of three) voting logic. When a single channel fails, the system switches without disturbance, eliminating the risk of single point of failure.

Comprehensive fault diagnosis: It is equipped with functions such as line disconnection detection, short circuit detection, power supply anomaly monitoring, and self-diagnosis of channel faults. Fault information is uploaded to the controller in real time, and it supports remote viewing of the fault location, shortening the troubleshooting time.

Flexible adaptation and expansion: Compatible with the entire TRICONEX series of safety controllers, it supports hot plugging and can expand the number of channels according to on-site requirements. The input logic (high/low level effective) can be configured through the system software.

Application scenarios

This module focuses on industrial scenarios with high security levels and high reliability requirements, and its core applications are:

Oil and gas industry: onshore oil and gas processing plants, pipeline transportation systems, emergency shutdown systems (ESD) of LNG receiving stations, fire and gas detection systems (F&G), collecting valve switch feedback, pressure switch signals, emergency shutdown button status, etc.

In the fields of chemical engineering and pharmaceuticals: Safety instrumentization systems (SIS) for chemical reaction vessels, distillation columns, and pharmaceutical fermentation equipment, monitoring the status of explosion-proof doors, alarm signals from toxic/flammable gas detectors, and feedback from emergency shut-off valves, to prevent material leakage and over-temperature and over-pressure accidents.

Power and energy industry: Safety control units for auxiliary systems of thermal power/nuclear power and new energy storage power stations, collecting protection contacts of generator sets, the status of high-voltage switches, and fire linkage signals to ensure the safety of the energy production process.

In the metallurgical and building materials industry: Safety control systems for steel blast furnaces and cement kilns are connected to equipment fault alarm contacts, emergency shutdown signals, and interlock protection switch statuses to prevent equipment damage or safety accidents in high-temperature and high-pressure scenarios.

Advantage Products:

DANFOSS VLT® AutomationDrive,Plus+1®,MCP
KEYENCE KV-800,KV-300,KP-3000,KP-7000,KJ,KV-Nano,HMI
GE FANUC PACSystems RX3i,90-30,90-70
SCHNEIDER Modicon M340,Modicon M580,Modicon X80,Pioneer
BENTLY NEVADA 3500/94,3500/53,3500/22M,3500/42M,330180-90-00
HONEYWELL Experion® PKS,ControlEdge™ ,HC900
ALLEN BRADLEY CompactLogix,ControlLogix, MicroLogix,Flex I/O
WESTINGHOUSE Westinghouse Modbus,Westinghouse 9080,Westinghouse 8000,Westinghouse 1000

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

BL
Bou Li
Sales Manager
📱
+86 175 5077 6091
R
Ricardo
Sales Specialist
📱
+86 188 5015 7206
T
Tina
Sales Specialist
📱
+86 131 2336 8748
DG
Doris
Sales Specialist
📱
+86 135 9953 1915

 

Something You Might Need:

EMERSON MITSUBISHI Bently Nevada WESTINGHOUSE
KJ2004X1-BA1 Q13UDEHCPU 102044-00-18-15-02 1C31227G01
KJ2005X1-BK1 Q03UDCPU 102044-00-18-50-02-00 1C31232G01
KJ2005X1-SQ1 Q04UDEHCPU 106765-16 1C31233G01
KJ2006X1-BK2 Q26UDVCPU 109549-01 1C31234G01
KJ2201X1-BA1 Q02UCPU 125094-02 1X00781H01L
KJ3102X1-BA1 Q26UDEHCPU 125388-01 5X00062G01
KJ3201X1-BA1 Q00UJCPU 128093-00-10-05-02-CN 5X00063G01
KJ3201X1-BA2 Q06UDHCPU 130118-0010-02 5X00226G01
KJ3203X1-BK1 Q26UDHCPU 131150-01 128277-01C 5X00226G03
KJ3204X1-BA1 Q04UDHCPU 131178-01 5X00226G04

 

 

Conditions

Original Brand New

Approximate Lead Time

3-5 days

Warranty

One Year

Online Service

24 / 7

Express Company

DHL / FedEx / UPS / TNT etc.

MOQ

1 Piece

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

190501 SPEED SENSOR
BENTLY NEVADA 190501 VELOMITOR CT SPEED SENSOR
The Bently Nevada 190501 Velomitor CT is a low-frequency version of the speed sensor designed to monitor the vibration of equipment operating at low speeds. HS CODE : 8538909200
More +
16710-17 BENTLY NEVADA
BENTLY NEVADA 16710-17 INTERCONNECT CABLE
The Bently Nevada 16710-17 is an interconnect cable for vibration monitoring systems that provides reliable signal transmission to ensure accurate vibration data from the sensor to the monitoring device. HS CODE : 8538909200
More +
330525 PIEZO-VELOCITY SENSOR
BENTLY NEVADA 330525 VELOMITOR XA PIEZO-VELOCITY SENSOR
The Bently Nevada 330525 Velomitor XA is a piezoelectric speed sensor that offers a more robust version of the 330500 Velomitor in a 316L stainless steel housing with a unique waterproof connector and cable assembly. Allows installation without a housing. This sensor is suitable for demanding industrial environments that require reliable speed measurement. HS CODE : 8538909200
More +
18745-01 BENTLY NEVADA
BENTLY NEVADA 18745-01 7200 FAMILY PROXIMITOR SENSORS
The Bently Nevada 18745-01 belongs to the Bently Nevada 7200 family of Proximitor sensors. This series of sensors is commonly used for non-contact displacement measurement and is suitable for monitoring the vibration and position of rotating machinery. HS CODE : 8538909200
More +
18745-03 7200 FAMILY
BENTLY NEVADA 18745-03 7200 FAMILY PROXIMITOR SENSORS
The Bently Nevada 18745-03 is a 5mm / 8mm Proximitor Sensor in the 7200 series, a non-contact measurement system for measuring the static and dynamic distance between the probe tip and the target object. It is particularly suitable for industrial applications that require high-precision position and vibration monitoring. HS CODE : 8538909200
More +
9571-10 BENTLY NEVADA
BENTLY NEVADA 9571-10 INTERCONNECT CABLE
The Bently Nevada 9571-10 is an interconnect cable for connecting vibration sensors and monitoring devices. HS CODE : 8538909200
More +
330180-51-00 BENTLY NEVADA
BENTLY NEVADA 330180-51-00 5/8mm Proximitor Sensor
The Bently Nevada 330180-51-00 is a 5/8mm Proximitor Sensor in the 3300 XL series for non-contact vibration and position measurement. HS CODE : 8538909200
More +
100630-00-30-10-02 BENTLY NEVADA
BENTLY NEVADA 100630-00-30-10-02 Proximity Probe Housing Assembly
The Bently Nevada 100630-00-30-10-02 is a component for installing and protecting proximity sensors. HS CODE : 8538909200
More +
Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Copyright 2025 @ TZ TECH Co., LTD. .All Rights Reserved Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Sitemap | Blog | XML | Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact

YOUR COOKIE SETTINGS

In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.

Accept and continue Decline cookies