6ES7414-5HM06-0AB0 Siemens SIMATIC S7-400H CPU 414-5H Central Processing Unit

Product parameters

Model: 6ES7414-5HM06-0AB0

Product Type: SIMATIC S7-400H Series Central Processing Unit (CPU 414-5H)

Working memory: 4 MB (2 MB code, 2 MB data)

Interface:

First interface: MPI/DP, 12 Mbit/s (RS485/Profibus)

Second interface: PROFIBUS DP

Third interface: PROFINET (PN)

Fourth/Fifth interface: 2 for synchronization modules (supporting high availability systems)

Firmware version: V6.0.1 / V6.0.2 / V6.0.3 (loadable)

Programming software: STEP7 V5.5 or higher version, including hardware updates

Power supply:

Power supply: Through the system power supply (such as 6ES7407-0KA02-0AA0)

Backplane bus current: 5V DC, typically 1.6A

Processing time:

Bit operation: approximately 31.25 ns

Word operation: approximately 31.25 ns

Fixed-point operation: approximately 31.25 ns

Floating-point operation: approximately 93.75 ns

Memory

Data blocks (DB) : Up to 6,000, with a maximum of 64 KB per block

Function blocks (FB/FC) : Up to 3000, with a maximum of 64 KB per block

Process image: 8 KB each for input and output

Operating temperature: 0°C to 60°C

Certification: CE, in compliance with EN 954-1 Category 4 and RoHS

Status: Current product, suitable for S7-400H and S7-400F/FH systems

Function

High availability and fault safety: Specifically designed for S7-400H redundant systems and S7-400F/FH fault safety systems, it supports hot backup and fault switching to ensure zero downtime and meet high availability requirements.

High-performance processing: 4 MB memory, capable of rapidly handling complex logic and data-intensive tasks, suitable for mid-to-high-end automation control.

Multi-interface communication

The MPI/DP interface supports multi-point communication and distributed I/O control, with a rate as high as 12 Mbit/s.

The PROFIBUS DP interface connects distributed devices, such as sensors, actuators or Hmis.

The PROFINET interface supports real-time Ethernet communication, enhancing network integration capabilities.

The two synchronization module interfaces support the dual-CPU synchronous operation of the S7-400H system.

Diagnostic function: Real-time monitoring of system status through LED indications (INTF, EXTF, BUS1F, BUS2F, FRCE, RUN, STOP) simplifies fault detection.

Flexible expansion: Supports 1 central rack and 21 expansion units, with a maximum of 65,536 digital channels and 4,096 analog channels, suitable for large-scale systems.

Programming support: Compatible with the STEP7 programming environment, supports multiple programming languages (such as LAD, FBD, STL), and supports CiR (Configuration in Motion) to reduce downtime.

Application scenarios

Process Automation

Chemical engineering and pharmaceuticals: Used for data-intensive tasks such as formulation management, process monitoring, and batch processing, ensuring high precision and stability.

Oil and gas industry: Manage oil refining or natural gas processing systems and ensure continuous operation through redundant design.

Manufacturing industry

Automobile manufacturing: Control high-speed production lines (such as assembly lines, welding robots), provide rapid processing and deterministic response times, and shorten machine cycles.

Mechanical manufacturing: Used in CNC machine tools or packaging machinery to meet complex control requirements.

Energy industry

Power plant: Control key equipment such as turbines and generators to ensure high availability and fault safety.

Substation: Manages high-voltage distribution systems and supports redundant configuration to prevent power outages.

High availability scenarios: Used in high-cost downtime scenarios that require zero downtime (such as steel mills and mining), to prevent high restart costs or data loss caused by controller failures.

Distributed control: Through the PROFINET and PROFIBUS DP interfaces, it is suitable for remote monitoring and distributed I/O systems, such as large factories or infrastructure.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected] 

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]