6ES7134-4GB51-0AB0 Siemens SIMATIC ET200 Analog I/O Module

Product parameters

Model: 6ES7134-4GB51-0AB0

Type: 2AI I 2/4WIRE HS (High-speed Analog Current Input Module)

Input quantity: 2 analog current inputs (supporting 2-wire or 4-wire transmitters)

Input signal range:

Current: 0-20 mA, 4-20 mA

Resolution: 13 bits + sign bits

Measurement accuracy: 0.1% full scale @ 25°C

Sampling time: Up to 0.1 ms per channel in high-speed mode

Input impedance: Approximately 250 Ω (typical value)

Module data:

Support for synchronous operation: Yes

Cable length (shielding) : up to 200 meters

Power consumption: Approximately 0.8W

Isolation

Input and backplane bus: Isolated

Between passages: No isolation

Interference suppression

Common-mode interference: minimum 70 dB

Common-mode interference: minimum 40 dB

Terminal module

Compatible with TM-E15S24-A1, TM-E15C24-A1, and TM-E15N24-A1 (screw or spring type)

Recommendation: 6ES7193-4CA20-0AA0, 6ES7193-4CA30-0AA0

Protection grade: IP20

Operating temperature: 0... +60°C (+32… +140°F)

Storage temperature: -40... +70°C (-40… +158°F)

Relative humidity: 10... 95% (No condensation)

Vibration: In compliance with IEC 60068-2-6

Impact: In compliance with IEC 60068-2-27

Certifications: CE, UL, cULus, ATEX, IECEx, FM

Installation method: DIN rail installation.

Function

High-speed signal acquisition: Supports a sampling rate of 0.1ms per channel, suitable for applications with high dynamic response requirements.

Flexible input configuration: Supports 2-wire or 4-wire transmitters, compatible with 0-20mA and 4-20mA current signals.

HART protocol support: It can communicate with intelligent devices that support HART and obtain device diagnostic information (configuration required).

Diagnostic function:

Disconnection detection

Overflow/undercurrent detection

Internal error diagnosis

Smoothing processing: Supports adjustable digital filtering (4-level smoothing factor) to optimize signal stability.

Modular design: Supports hot plugging, is compatible with the ET 200S system, and is easy to expand and maintain.

Integration: Integrated with SIMATIC S7-300, S7-1500 and other PLCS via PROFINET or PROFIBUS.

Environmental adaptability: IP20 protection grade, operating temperature 0... +60°C, suitable for installation in control cabinets.

Application scenarios

Process control: It is used in industries such as chemical engineering, petroleum and natural gas, and water treatment to collect analog signals such as pressure, flow rate, and liquid level.

Distributed Control System (DCS): Integrated into SIMATIC PCS 7 or S7-1500 systems, supporting high-precision data acquisition.

Factory automation: Monitoring sensor signals on the production line, such as flow meters and pressure transmitters.

Energy management: Used for the collection of current signals in power systems or public utilities.

Food and beverage: Precise control of analog input signals for filling or packaging equipment.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Ricardo(Sales Specialist)       

Tel:+86 18359251915                                                                                                      

E-mail:[email protected]

Doris(Sales Specialist)       

Tel:+86 13599531915                                                                                                      

E-mail:[email protected]